UPR Clean Side Separator fitment

[Tomikaze]

I installed the Dual Valve catch can with no issues. The CSS was a pain in the arse. The hose on that fitting is not easy to remove. I finally got but my hose isn't as long (hahah) as the one in the instructions. It's so tight the hose is pushed up tight against the dipstick. Anyone else have this issue? I'm going to look for a ford dipstick that's the right length but with a stubby top so it doesn't interfere. Wondering if anyone else ran into this.

Sponsored

 

[TheRealSasquatch]

I installed the Dual Valve catch can with no issues. The CSS was a pain in the arse. The hose on that fitting is not easy to remove. I finally got but my hose isn't as long (hahah) as the one in the instructions. It's so tight the hose is pushed up tight against the dipstick. Anyone else have this issue? I'm going to look for a ford dipstick that's the right length but with a stubby top so it doesn't interfere. Wondering if anyone else ran into this.

Mine is very tight and doesn’t fit well but it isn’t mangled like yours. I wish it came with a custom pipe to make a cleaner install.

 

[Tomikaze]

I mangled it with the heat gun. D'oh!

 

[MeBEEF]

Mine was also tight, but doable it's especially tight with the AFE intake. They are almost incompatible.

 

[Tomikaze]

The tube is only a $12 part. Just not sure how to access the lower portion of it.

Sponsored