Audio control sells load resistors, not sure if you need them though, maybe try without first and see if any issuesInstalled a audio control Lc7i to run to aftermarket amps. Are resistors required between B&O amp and Lc7i ? And if so what would be recommended ?
Mostly plug and play. There is some programming but it’s just setting dip switches.Got rid of the audio control line out converter. Is the nav.tv A2B a plug and play or is a computer and program required ?
I don’t think you understand what I said. I said there is some programming but it’s just dip switches. Dip switches are small switches on the side. There is no computer. You just need to flip one or two to tell it what car you have have what type of output you want and that’s about it.Appreciate response. Computer involved I’ll have to pass. Local car audio places charge $100 an hour. All I have is iPhone, won’t invest in laptop
Actually NAVTV removed the dipswitches in favour for usb. You now change the settings via a web interface so a PC is required.I don’t think you understand what I said. I said there is some programming but it’s just dip switches. Dip switches are small switches on the side. There is no computer. You just need to flip one or two to tell it what car you have have what type of output you want and that’s about it.
Then I apologize to OP because I thought it worked like the PacAudio units.Actually NAVTV removed the dipswitches in favour for usb. You now change the settings via a web interface so a PC is required.