Lifted and leveled 2024 Ranger Raptor

[derichio02]

Looks good @BigMeatsBronco ! I haven’t seen many folks lift the rear, just leveling the front.

I’m thinking of going with RPG perch collars 2.25F/1.5R. I’m okay with some rake but I’m hoping to get similar results to you.

Sponsored

 

[Love2Fish]

Going to do the same thing. Looks great. What are you using on your steering linkage? Curious what your opinion is, some say don't beef it up.

 

[Bmadda]

What tire size did you end up going with?

 

[KCarl]

Have you done any real wheeling with this to fully extend the rear to full droop? If so, did your rear suspension sensors survive? I did a a similar rear lift and the sensors were were stretched to max and ths little link on the sensor broke.

 

[Sauce]

Truck looks great, but I'm totally distracted (and obsessed) with the half-cab Bronco.

 

[BigMeatsBronco]

Going to do the same thing. Looks great. What are you using on your steering linkage? Curious what your opinion is, some say don't beef it up.

Rough Country tie rods

 

[BigMeatsBronco]

What tire size did you end up going with?

ready lift 2" bronco spacers in the front...1.25 on the rear

 

[vivasjm]

I used a readylift in the front and a Fabtech on the rear.

I need your help on this. I'm looking for a rear lift and no one can answer this:

- Are the rear strut spacers identical in shape, design, and bolt hole pattern to the front strut spacer in the ranger raptor 2024?
- Please confirm that Fabtech FTS22338. FTL5212 works as Ranger Raptor rear spacer


Thank you very much

 

[Bushmechanic]

Installed a 1.75" spacer in front and 1.25" in rear.
leveled the rake out ALOT.

total lift is 2.375" front and
1.5" rear.

very happy with the results.

That's one of the most brutally aggressive tread patterns I've seen this side of a Simex Extreme Trekker. With those and three lockers I don't think you have to worry about being stuck any time soon.

That Bronco's angles make it look like an oversized Micro Machine. You're pretty much ready for anything.

 

[West27]

I need your help on this. I'm looking for a rear lift and no one can answer this:

- Are the rear strut spacers identical in shape, design, and bolt hole pattern to the front strut spacer in the ranger raptor 2024?
- Please confirm that Fabtech FTS22338. FTL5212 works as Ranger Raptor rear spacer


Thank you very much

The ones from goat offroad u can mount front or back,, same spacer they said.

Sponsored