rwolfcastle
Well-Known Member
Are there any tricks that can be done to kick the bass in from a lower volume? Any settings to tweak on the amp or anything? Or is the 30% a factory designation that can never be altered?Hi, I work for Harman, so the B&O system comes from us, based on the specifications provided by Ford to Harman. Having a Ranger and hearing other systems I would rate the ranger B&O sytem as an 8.5 out of 10.
Im comparing it with my previous vehicle sound system, which was a BMW x6 with Harman premium system. I would rate that one at 9.5, and my wifes vehicle whis is an Audi A7 with a B&O system, that would be a 9 from my perspective.
The difference with the B&O system from the ranger is basically the amount of bass the system provides and how early you hear it. In the ranger the system is tuned to provide heavy bass from 30% of the volume upwards, so if you hear it low the bass is very low too. While in the BMW and Audi specs you can hear the bass kick even at low volumes.
One of the cool features from the B&O system in the Ranger dough is the way the resonance of the bass is done, its a new technology that uses the chassis as resonance, not just a box as its traditionally done, which takes a lot more space. The X6 for example had a sub in the trunk and another one on each of the front seats. While the A7 has a large subwoofer box in the spare tire. In the ranger everything is achieved by a very small sub oval speaker and literally no box.
The system sounds very good above 30% volume, based on the notes that sound better I would say its tuned for coutry music or something alike. If you want more bass I would recommend to add an external powered bass only (Harman offers generic JBL and Infinity under seat powered subs that could work for that application), but taking the signal from the OEM bass lines. The new systems control not only audio but other features, so I would not recommend butcher the OEM harness and install an aftermarket system like you could do in older vehicles. If upgrading do only tried install configurations and harnesses.
I hope the info is useful.
Sponsored