Trail Testing the Ranger Raptor at Trail Hero Expeditions (American Adventure Lab)

[KrillOill]

They're already produced at really close to our cost. The labor to laser cut/de-nest/assemble/package takes up almost all of the cost of the product, not to mention the material. We're just trying to get our name out into this market with a low price point.

Order placed.

Sponsored

 

[pablo94sc]

OK. I understand the request. Typically, we stay away from moving the seats. The insurance liability is pretty high with those products. It's one thing to remove them completely, but another to reattach the seat in a non-factory location. I am open to the idea, but there would have to be enough demand to justify the risk (and specific insurance requirements on our side).

Hmm. I'm personally not worried about it, but I've had local fabricators shy away from this for the liability reasons you mentioned.

 

[AdventureLab]

Order placed.

Waht

Hmm. I'm personally not worried about it, but I've had local fabricators shy away from this for the liability reasons you mentioned.

Ironically, it isn't the customer we have to worry about. It's the lawyers and judges.

 

[AdventureLab]

Order placed.

thanks!!!!

 

[ClickClickBoom]

Any ETA on the trailer plug with the Anderson Plug?

 

[E40]

Any hints on the price & ETA of bed slider??

I'm also very interested in about your plan/product for truck bed sealing. I have retractable cover and Keko tail gate seal kit, but they were no match for Utah's fine dust.

 

[pablo94sc]

Waht

Ironically, it isn't the customer we have to worry about. It's the lawyers and judges.

Should we make a poll? I know we are all lamenting the lack of storage in the cab, and adding an underseat sub makes it worse.

 

[AdventureLab]

Any ETA on the trailer plug with the Anderson Plug?

It's actually already done. I just haven't been able to add it to the site yet. I'll try to get that going early next week. I have a ton of parts to design before the Ranger Raptor build coming into the shop next week. If you need it sooner than that, I can make you one. Just let me know.

 

[AdventureLab]

Should we make a poll? I know we are all lamenting the lack of storage in the cab, and adding an underseat sub makes it worse.

I would definitely be curious to see what the demand would be for that.

 

[AdventureLab]

Any hints on the price & ETA of bed slider??

I'm also very interested in about your plan/product for truck bed sealing. I have retractable cover and Keko tail gate seal kit, but they were no match for Utah's fine dust.

I don't think it's the tailgate that's the problem. I had a really good "ghetto gasket" on it. I'm confident I stopped 95% of the dust coming in from the tailgate. It was still full of dust when I opened it up. There are huge holes throughout the bed that are going to be hard to seal. I will work on that in a couple of weeks. It'll be a combination of gasket, edge molding, and possibly expanding foam.

As for pricing, I haven't had any time to dig into that yet. That'll probably be late next week. I have a ton of accessories planned that will use those bed floor rails, not just slides.

 

[ClickClickBoom]

It's actually already done. I just haven't been able to add it to the site yet. I'll try to get that going early next week. I have a ton of parts to design before the Ranger Raptor build coming into the shop next week. If you need it sooner than that, I can make you one. Just let me know.

Thanks, not super urgent. I've got a trip coming up in a couple weeks but likely won't have room to install it. I'll wait to see what's going on with the molle panels/ bed accessories and maybe place a combined order.

Sponsored