Ranger Raptor Wheels KO3 285/70/17 fit on a Ranger XLT?

[ericsmr]

Just as the title mentions, looking to see if anyone has swapped the RR wheels and tires onto an XLT and how it fit?
I have a 2.5inch level kit on the front but I don’t want to have to do any chopping or removing the crash bar, okay with spacers. Also wanted to see if everyone thinks this is a good deal? Selling with 100 miles at 1750 for the 4.

Sponsored

 

[Arsenall11]

Should fit just fine! And yes it is a good deal.

 

[NevadaBob]

I was just looking at those myself. I've never dealt with beadlock wheels; anything to know about there?

 

[Dino Jockey]

I was just looking at those myself. I've never dealt with beadlock wheels; anything to know about there?

Those are beadlock “capable” wheels I believe. Same design as the Broncos. There is an additional ring that has to be purchased. To my knowledge it is illegal to use true beadlock wheels on the street dur to DOT regs.

 

[jeffers]

The control arms on the Raptor are longer than on the standard Ranger, which effects the offset required. I think you might need spacers to make it work. We know that an offset of +35 works for that size tire for the standard Ranger, so maybe a 20mm or slightly less spacer. You're going to have to try it and see how it fits or try to research and see if anyone else has done it.

Sponsored