Show me your overlanding set up!

[RapRanger21]

Thank you @RapRanger21 - the photos confirm I can mount this with the plastic bed rails (which is what I was hoping to see). Appreciate the photos!

Happy to help

Sponsored

 

[Nathanm22287]

Keeping things light and modular. Built for both overlanding and off-roading, I can add/ remove anything within 10 minutes as needed.

Billibars crossbars setup with awning bracket
ikamper mini 3.0 tent
180 eezi awn dragonfly mini Awning
shovel & mount
ironman 50l water tank
20l fuel jerry can and mount (smittybuilt)
sliding tray (loadslider) w/ custom bolt-on brackets to fit without drilling the tub
ARB twin pump + air tank setup behind rear passenger fender

+ other stuff (icom radio, recovery gear...etc.) and a cool custom made pressurized water system which you'll find on my build thread soon

Sweet setup! Its exactly what I'm going for. What size Billiebars are those? They look like the 11" ones. Did you have to offset your Ikamper to the passenger side a bit with the awning mount? I have been looking at the same bars and tent so i have many questions! Thanks for the post.

 

[joprato]

This is what mine is turning out to be. I am almost done with it, another few months and the addition of some molle side panels in the tub and I’ll be ready for some great overland trips.

 

[wlarsen76]

What I did this weekend.

 

[AdventureLab]

We built this bed rack to stay as light as possible but still provide some extra storage for our tent/tracks/tools/Starlink/etc. Very happy with how functional it is. Only $150/rail! Made in the USA!

 

[J.Dub]

We built this bed rack to stay as light as possible but still provide some extra storage for our tent/tracks/tools/Starlink/etc. Very happy with how functional it is. Only $150/rail! Made in the USA!

Thats a really nice set up. If I wasn't rocking a camper, I would go with this.

 

[MidnightSpecial]

We built this bed rack to stay as light as possible but still provide some extra storage for our tent/tracks/tools/Starlink/etc. Very happy with how functional it is. Only $150/rail! Made in the USA!

Any possibility in the future to have these work with t-slots?

 

[AdventureLab]

Thats a really nice set up. If I wasn't rocking a camper, I would go with this.

Thanks!

 

[AdventureLab]

Any possibility in the future to have these work with t-slots?

100%. I got some measurements from a potential customer that has the Retrax cover now. That will be the first one.

 

[joprato]

@AdventureLab WAOW ! the colours on that raptor are something else. I absolutely LOVE IT ! And the whole rack setup looks nothing short of fantastic! I’m going now to have a look at the website !

 

[J.Dub]

This is my current setup. I do plan on making a pull out kitchen and storage system in the bed.

 

[AdventureLab]

@AdventureLab WAOW ! the colours on that raptor are something else. I absolutely LOVE IT ! And the whole rack setup looks nothing short of fantastic! I’m going now to have a look at the website !

Thanks. Let me know if you have any questions.

 

[..stiffler..]

Here is my setup.

 

[embedded rock]

We use a trailer, so I’m no help

Still using the roll-top tonneau cover?

 

[BrrRaptor]

100%. I got some measurements from a potential customer that has the Retrax cover now. That will be the first one.

I've got a BAK x4ts and can help you with measurements if you'd like.

Sponsored