SOLD THROUGH- Gorilla spline lug nut Kit FOR $4 -LINK

[ATestBishop]

Wanted to share this. Was looking for value, quality made "tuner" style lug nuts to replace the 2 piece OEM's and found this kit for $4 on Amazon, bought 10 kits for $40 in 2 separate orders and there's more left apparently. Seemed like the best deal I could find, not sure how many are in stock. YMMV Here's the link- https://www.amazon.com/dp/B00LE9A3W6?ref=ppx_yo2ov_dt_b_fed_asin_title

Should be compatible with- Fits 2021-2026 Ford Bronco (Only Non-Raptor)
Fits 2019-2026 Ford Ranger (Including Raptor)

Specs from Gorilla-
Small Diameter Spline Acorn Lug Nuts - 3/4" & 13/16" Dual Hex Key - 12mm x 1.50 Thread Size - Chrome Finish - Set of 24 (K6CS-12150GR)

Sponsored

 

[RJRanger]

Do you trust the quality? Seems awful cheap but thanks for sharing.

 

[purdyd]

I’m guessing that is the price for one.

 

[ATestBishop]

I have them in hand and I can say the quality is excellent, I did my research. I can also say that I already received half my kits and these are full kits with 24 lug nuts, a drive tool and sticker

 

[CACTUSGREYFX4]

I thought the stock size was 14mm. Just chrome or do they have them in black. Unfortunately can't ship to my location.

 

[ATestBishop]

Refer to the Ford accessories website to see the stock confirmed size of lug nut, I added a photo of that information- 1Fits 2021-2026 Ford Bronco (Only Non-Raptor)
Fits 2019-2026 Ford Ranger (Including Raptor)

 

[superj]

I ordered some. Thanks for posting

 

[ATestBishop]

For sure

 

[FergyA]

When I did my hunting Gorilla was one of the top recommended brands, so good find! I paid $60 for a 24 piece set from them a few months back. I ended up with the black non-splined version. (https://www.ebay.com/itm/275345666320). Tried to find chrome at the time, but they were significantly more expensive. Have had no problems so far.

 

[ATestBishop]

Thanks, yes I tried to do my research

 

[FergyA]

I'll note these look quite a bit longer than the OEM lugs, so may stick out a bit (at least on the FX4 rims). See pics below from my install of the non-splined version I was talking about. They stick out a very small amount more than the factory lugs, but look fine to me. (And was worth it to get rid of the two piece lugs). I suspect these are even longer.

 

[ATestBishop]

Thank you for the comparisons, I can perhaps lay ground to your thought there with these specs directly from the manufacturer- Outside Diameter 20 MM
Overall Length 1.36 IN

 

[ATestBishop]

Now how that length compares directly to the 2 in your photo (OEM and Gorilla) I can't say right now

 

[RJRanger]

I have them in hand and I can say the quality is excellent, I did my research. I can also say that I already received half my kits and these are full kits with 24 lug nuts, a drive tool and sticker

Just ordered a set....thanks for posting!

 

[FergyA]

Now how that length compares directly to the 2 in your photo (OEM and Gorilla) I can't say right now

Cool. Mine (the black set) are listed at 1.4", so if anything these might actually be a speck shorter (or realistically the same and someone's rounding). Probably not an issue!

Sponsored