AdamF@IAG
Diamond Sponsor
- Thread starter
- #1
Original Post
What's up, Ranger Raptor Crew!
We’ve got a new product ready for testing for the 2024+ Ranger Raptor — the IAG Trail Shield Lower Trailing Arm Sensor Relocation Kit.
If you’ve been off-road with your Raptor, you probably already know how exposed the lower trailing arm sensor is. It hangs low and is an easy target for rocks and debris, which can lead to suspension errors, limp mode, or a dead Fox Live Valve system.
Instead of covering up a problem like other solutions on the market, we chose to move the sensor entirely to keep it out of harm's way. This kit moves the sensor up about 4 inches and closer to the frame, where it’s protected. The articulating bracket design keeps the factory function of the sensor while getting it out of harm’s way. Made from 11-gauge powder-coated steel, it’s built to handle abuse. Install is straightforward and takes about 10–15 minutes per side with no cutting, drilling, or splicing required.
Here’s the deal:
If you’re interested, send us a message. @IAG Off-Road We’ll send over an NDA that needs to be signed before moving forward.
Thanks as always for helping us test and improve new products for the Raptor platform!
What's up, Ranger Raptor Crew!
We’ve got a new product ready for testing for the 2024+ Ranger Raptor — the IAG Trail Shield Lower Trailing Arm Sensor Relocation Kit.
If you’ve been off-road with your Raptor, you probably already know how exposed the lower trailing arm sensor is. It hangs low and is an easy target for rocks and debris, which can lead to suspension errors, limp mode, or a dead Fox Live Valve system.
Instead of covering up a problem like other solutions on the market, we chose to move the sensor entirely to keep it out of harm's way. This kit moves the sensor up about 4 inches and closer to the frame, where it’s protected. The articulating bracket design keeps the factory function of the sensor while getting it out of harm’s way. Made from 11-gauge powder-coated steel, it’s built to handle abuse. Install is straightforward and takes about 10–15 minutes per side with no cutting, drilling, or splicing required.
Here’s the deal:
- We’re looking for 5 testers
- You’ll purchase the kit at the normal price of $179.99
- You’ll have two weeks after receiving it to install and provide feedback
- Once we get your feedback, you’ll get your $179.99 refunded back to your original payment method (no feedback = no refund)
- We’ll be asking about install, fitment, functionality, packaging, and overall impressions
If you’re interested, send us a message. @IAG Off-Road We’ll send over an NDA that needs to be signed before moving forward.
Thanks as always for helping us test and improve new products for the Raptor platform!
Sponsored
