Anyone running chase lights in the 3rd brake housing?

[c72k]

Planning to try the GJ motorsports setup with the BD S2 light setup, anyone have anything similar?

Sponsored

 

[BuenaRaptor]

I’m running the Mpower set up. They do not throw light like a BD S1 but for chase purposes it’s perfect

 

[paulhut]

I’m running the Mpower set up. They do not throw light like a BD S1 but for chase purposes it’s perfect

That looks like it's higher than the cab and maybe a bit crooked. Is it or am I seeing it wrong?

I liked the mpower ones I saw that the Raptor Assault and wanted to purchase but Mppower (at the time) said they didn't have them for the RR.

 

[ShadowDragon24]

I’m running the Mpower set up. They do not throw light like a BD S1 but for chase purposes it’s perfect

is that a soundoff f150/super duty kit? I got the super duty strobe kit for the 180° intersector lights, and when I start screwing in the screws for the mount, the top corners lift off and the rubber seal dont seal all the way, so I removed it because we were called for rain for a bit. and I was getting a are cap installed. But where they are 180° spread, I might put them back on, and then find somein to go on the rear. diode dynamics new stage series 10 chase bar they officially unveiled at sema is on my list now

was gunna do the same thing, set them to a slow flash(instead of the fast strobe pattern from the factory setting), or a steady burn, and use them as chase.

I do like how the no drill hood lights, fit perfectly in the grill, and are also no drill. lol

 

[BuenaRaptor]

That looks like it's higher than the cab and maybe a bit crooked. Is it or am I seeing it wrong?

I liked the mpower ones I saw that the Raptor Assault and wanted to purchase but Mppower (at the time) said they didn't have them for the RR.

You are looking at it correctly and that’s how the holes align. I ordered it as a RR unit but I feel like this is a f150 one. My plan is to drill out the holes a bit so I have some adjustability.

 

[RaptrJr]

If you haven't already, get the Swarfworks 3rd brake like if you are planning on doing the BD lights. It's a super nice piece and the way it mounts and fits to the cab is better than the GJ. (not sure the GJ is even available at this point since Swarfworks bought them)

 

[AZ Ranger Raptor]

Bulletproofdiesel has 3rd brake light antenna mount with either Baja Designs amber chase lights or Rigid amber chase lights. I have the antenna mount with the rigid chase lights.

https://bulletproofdiesel.com/colle...ount-2019-ford-ranger-90201170_19ranger_amber

 

[superj]

Bulletproofdiesel has 3rd brake light antenna mount with either Baja Designs amber chase lights or Rigid amber chase lights. I have the antenna mount with the rigid chase lights.

https://bulletproofdiesel.com/colle...ount-2019-ford-ranger-90201170_19ranger_amber

what is the antenna for?

 

[AZ Ranger Raptor]

what is the antenna for?

Rugged Radio M1 55 watt VHS two way radio. I belong to Arizona Raptor Runs (AZRR) That is how we communicate on runs.

 

[superj]

cool

 

[RaptrJr]

Swarfworks with the antenna mount.

 

[sdca7718]

Swarfworks with the antenna mount.

What harness did you get and where did you tap into for the S2s?

 

[RaptrJr]

What harness did you get and where did you tap into for the S2s?

LVJ harness. I think it was the basic with reverse.

 

[sdca7718]

LVJ harness. I think it was the basic with reverse.

I ordered the full STT with Starlink but will have to see how the wiring goes since there’s not much online about where to get power.

 

[RaptrJr]

I ordered the full STT with Starlink but will have to see how the wiring goes since there’s not much online about where to get power.

Yea I didn't want to deal with the wiring of the STT or really care about it. When I did mine I was probably one of the first with a ranger to do it and it was just kind of hoping I tapped into the right wire for the reverse. Thankfully I got it right the first time.

From what I remember I think the wires were pretty much the same as the F150's, its just the BCM is on the drivers side instead of the passenger side.

Sponsored