Sponsored

steveconnery

Well-Known Member
First Name
Steve
Joined
Mar 18, 2025
Threads
10
Messages
100
Reaction score
186
Location
British Columbia, BC
Vehicle(s)
Ranger XLT FX4
Did you use the 5100 in the rear to lift at all? Was considering getting a lift block and adding the 5100 from the 5G in mine.
I did the same as you with the bronco front suspension, it’s great but I’m considering lifting it a little more to match the potential rear. Are the 5100 from the 5G the exact same length?
Sponsored

 

DrewR

New Member
First Name
Drew
Joined
Oct 28, 2025
Threads
0
Messages
3
Reaction score
1
Location
Virginia
Vehicle(s)
2025 Ford Ranger XLT
Sorry, I know this is an old thread but had a question about your wheel and tire clearance to the knuckle. I just picked up the same wheels for my stock 25 XLT FX4 and am going to run 265/70R17 KO3s. Hoping I won’t have any clearance issues with the suspension. I’d like to avoid doing a level for now if possible. Thanks!
 
OP
OP
Clay6GRanger

Clay6GRanger

Well-Known Member
First Name
Clayton
Joined
Sep 22, 2023
Threads
1
Messages
70
Reaction score
115
Location
Arizona
Vehicle(s)
2024 Ford Ranger XLT FX4
Sorry, I know this is an old thread but had a question about your wheel and tire clearance to the knuckle. I just picked up the same wheels for my stock 25 XLT FX4 and am going to run 265/70R17 KO3s. Hoping I won’t have any clearance issues with the suspension. I’d like to avoid doing a level for now if possible. Thanks!
Yeah those are only 1cm wider than the stock tires, should be fine on the stock wheels even !
Sponsored

 
 







Top