Bulletpoint Phone Mount Installed

[gtistiffler]

Installed my Christmas present just now. I’m impressed! Everything feels super solid. I ran the charging cable through an existing hole above the charging ports behind the radio and out next to vent. Was able to use a flexible claw tool and pull the cable through without removing any trim besides the one piece to install the mount. Even included the tools in the box!!

Sponsored

 

[superj]

Looks good

 

[embedded rock]

Looks good.


Using the same system on my RR. Also had BulletPoint for my former Wrangler JL.

 

[JimG]

Looks Good. I have a similar mount on my truck, but haven’t run a charging cord up to it. I probably will now.
I did use some similar components and a holster to mount my 9mil to my seat. No holes and 1 bolt. Moves back and forth with my seat.

 

[SDRangerRaptor]

You guys should have looked at Tacform mounts

https://www.tackform.com/collections/ford-ranger-2024-2025-traxx-collection

 

[JimG]

You guys should have looked at Tacform mounts

https://www.tackform.com/collections/ford-ranger-2024-2025-traxx-collection

LOL. Tacform is the similar mount I used. I love their products.

 

[jordantii]

LOL. Tacform is the similar mount I used. I love their products.

Lets talk about the firearm mount. What is this? Where do you get it?

 

[gonzo117]

Looks Good. I have a similar mount on my truck, but haven’t run a charging cord up to it. I probably will now.
I did use some similar components and a holster to mount my 9mil to my seat. No holes and 1 bolt. Moves back and forth with my seat.

Hi Jordan,

This looks great and makes the weapon very accessible. Will this work in a 2025 Ranger Lariat? Can you put some links to the holster and other parts you used to do this? Thanks, Bob

 

[jordantii]

Hi Jordan,

This looks great and makes the weapon very accessible. Will this work in a 2025 Ranger Lariat? Can you put some links to the holster and other parts you used to do this? Thanks, Bob

I not the guy who posted this. I'm trying to get some info from @JimG

 

[JimG]

Hi Guys,

Tomorrow I will start a new post on how I did everything. I was pretty simple. After I post it I’ll reply on this post and let you know how to find it. I hope that’s works. Have a great night.

 

[gtistiffler]

You guys should have looked at Tacform mounts

https://www.tackform.com/collections/ford-ranger-2024-2025-traxx-collection

I looked at both and decided on this one. Seemed about the same and no drilling with this one.

 

[JimG]

I posted how I mounted my gun. Look for 9mm pistol mount no holes.

 

[jordantii]

Mag mount another option
don't ever leave it in. the truck

As a shooter the issue I have with this set up is the trigger is exposed. I see the thumb safety but for me the trigger always needs to be covered.

 

[John E Davies]

Nice job. Seems like your phone mount should have a USB port so you could use a 90 degree cable there, is that possible? That extreme bend is not good for the cable.

I have my gps positioned there, the AC vent discharge catches the bottom edge and cools the battery, if your phone gets hot, play around with the positioning. In summer my gps got so hot it shut down completely, this location fixes that problem 100%.

John Davies
Spokane WA USA

 

[Sojourner]

Tackform, Bulletpoint, ProclipUSA. Use them all, love them all. Can't go wrong with any of them. Which I pick depends on what I'm trying to do and on which vehicle.

Sponsored