Sponsored

Cable Routing - Dash Suggestions - Help Needed!

Drazhar

New Member
Joined
Nov 8, 2026
Threads
1
Messages
1
Reaction score
0
Location
Georgia, USA
Vehicle(s)
2024 Ranger XLT 4x4
I am going to install a Tackform Slim on my '24 Ranger so I can install the AuxBeam 4 gang Slim on it. Currently have a light bar installed and will be adding ditch lights and reverse lights (horrible night vision). For those that have installed the Tackform system, how did you route your cables with limited visibility?
Sponsored

 

Pwaicon

Member
Joined
May 25, 2026
Threads
1
Messages
13
Reaction score
8
Location
South Lake Tahoe
Vehicle(s)
26 Ranger Raptor, 22 Bronco Badlands, 24 Lincoln Nautilus, 19 Lincoln Navigator
I use the Tackform Slim Track to mount my phones and iPad Mini. I ran the wire on the inside of the dash to power 2 USB C ports. It is not noticeable and the wire comes through the "vent" on the top. I didn't need to drill anything and it's totally reversible. I did need to take some of the dash off to run the wire, however; it was worth it since I was also installing the port for my GMRS Mic in the open cubby above the glove box and I also put a USB C port in the upper glove box.
Ford Ranger Cable Routing - Dash Suggestions - Help Needed! tempImage3YARcO
Ford Ranger Cable Routing - Dash Suggestions - Help Needed! tempImageOpxNyx
Ford Ranger Cable Routing - Dash Suggestions - Help Needed! tempImageLeNPYq
Ford Ranger Cable Routing - Dash Suggestions - Help Needed! tempImageeqXj2f
Ford Ranger Cable Routing - Dash Suggestions - Help Needed! tempImageyWPG2S
Ford Ranger Cable Routing - Dash Suggestions - Help Needed! tempImagegpqbAG
Ford Ranger Cable Routing - Dash Suggestions - Help Needed! tempImage8gJq7Y
Ford Ranger Cable Routing - Dash Suggestions - Help Needed! tempImageTcASy9
 
 







Top