FORScan NA Ranger 6th Gen (2024+) Crowdsourced Spreadsheet

[Sequoia]

Just hang on. Will provide you the solution in a couple of minutes.. Its easy. Just connecting my Ranger and will search the setting.

Sponsored

 

[Sequoia]

I’m sorry, I need to take another look tomorrow. I couldn’t find it quickly just now. It was something like “Remember fog lamp button position.”

 

[wawy]

I’m sorry, I need to take another look tomorrow. I couldn’t find it quickly just now. It was something like “Remember fog lamp button position.”

Thank you for the hint, I have checked all sheets but could not find it.

 

[Sequoia]

I will take another very close look later. I have it set up like this, but I can’t remember exactly where the setting was. The configuration is such that it remembers the on or off status of the fog lights. So, if I turned off the car and the fog lights were on beforehand, they will always be on at every start.


I configured it this way afterward.

 

[JR007]

I will take another very close look later. I have it set up like this, but I can’t remember exactly where the setting was. The configuration is such that it remembers the on or off status of the fog lights. So, if I turned off the car and the fog lights were on beforehand, they will always be on at every start.


I configured it this way afterward.

I was able to do this with my Bronco, but haven't figured it out on my RR. So I am interested as well.

 

[wawy]

I was able to do this with my Bronco, but haven't figured it out on my RR. So I am interested as well.

I have searched the Bronco forums and figured out the solution

Module: BdyCM Non-AsBuilt
FrontFog_AutoCancel_Cfg (FFACC)
726-39-02 xxxx x*xx xx--
the default value is 1 change it to 0

tested on Ranger Raptor 24 (Thai Made) and its working perfectly.

 

[Sequoia]

Thank mate!! Great job. That was the point.

 

[Sequoia]

I saw this in a Video.. How is it possible to get these gauges??

 

[BigMeatsBronco]

Where are we on trail turn assist? It still shows as feature TBD.

I got ours to work today, following instructions from @Sequoia , although the numbers were not the same in ABS , I only changed the first character in second row, to a "D"...my second number in same row was already a "6"

seems to work

 

[DIYPSCM]

I can 100% confirm that for '24 Lariat 2.7, the instructions in TBD section work without modification. I changed the 2 display entries and the "add 8" at 760-03-01 . Confirmed I have all dash displays and ABS kicks in to lock the wheel(s).

Note that I end up with different numbers than the RRs above.

Thanks all!

 

[JR007]

I have searched the Bronco forums and figured out the solution

Module: BdyCM Non-AsBuilt
FrontFog_AutoCancel_Cfg (FFACC)
726-39-02 xxxx x*xx xx--
the default value is 1 change it to 0

tested on Ranger Raptor 24 (Thai Made) and its working perfectly.

This worked for me. Very happy with this change. I know it is a small one, but I sure do like that my truck now remembers my choice of keeping my fogs on.

 

[luckyPad]

I saw a video on the internet with ECO COACH and selectable drive modes (selecting drive modes in infotainment screen) working in Next-Gen. I would appreciate if someone can share on how to do it.

Found and tried "selectable drives modes" below from spreadsheet but its not working for me. The menu came up in infotainment but every time I press a mode, it switches back to normal.

APIM

7D0-01-04

xxxx

xx*x

xx--

Change value of * to C

 

[Waffel]

I actually tested TTA a couple weeks ago but got busy. Updated the spreadsheet for that, and the fog remember settings. Weirdly my coding is already set to remember fog settings, anyone else?

 

[Waffel]

I saw a video on the internet with ECO COACH and selectable drive modes (selecting drive modes in infotainment screen) working in Next-Gen. I would appreciate if someone can share on how to do it.

Found and tried "selectable drives modes" below from spreadsheet but its not working for me. The menu came up in infotainment but every time I press a mode, it switches back to normal.

APIM

7D0-01-04

xxxx

xx*x

xx--

Change value of * to C

Can we get the video so we know what you're looking at?

 

[DIYPSCM]

I actually tested TTA a couple weeks ago but got busy. Updated the spreadsheet for that, and the fog remember settings. Weirdly my coding is already set to remember fog settings, anyone else?

Just for historical correctness... the TTA verification should be 2025, not 2024

Sponsored