Mirror assembly - 2026s don’t have side mirror turn indicators

[sdca7718]

Thanks for the info! I should have mentioned that I'm looking at/for RRs. New or used - but Chat didn't say they were any differences.

Good to know!

Also thinner bed caps on the 26. 24 had a j brace issue for most of the year..

Sponsored

 

[ShadowDragon24]

So after install does anyone know where on forscan they get enabled? Also wondering if the ROW mirrors have the heater or if it will have to be swapped over.

if you're installing heated glass on a non heated mirror truck(that is pre wired) or putting 24-25 mirrors on a 26 truck. look at my tread installing heated mirrors on my 2025 xlt. the driver and passenger door modules have the settings for the turns, and heated glass, and I think the puddle lights. then you also have to go into the bcm? (or hvac module) to tell the heated glass to come on with the rear defroster.

 

[sdca7718]

if you're installing heated glass on a non heated mirror truck(that is pre wired) or putting 24-25 mirrors on a 26 truck. look at my tread installing heated mirrors on my 2025 xlt. the driver and passenger door modules have the settings for the turns, and heated glass, and I think the puddle lights. then you also have to go into the bcm? (or hvac module) to tell the heated glass to come on with the rear defroster.

Finally got the mirrors with signals that should have been stock on the ‘26. This was an easy install but I did snap a small piece of the mirror cap tab. I added them in forscan and they appear to be working correctly. I swapped the cameras from stock so I didn’t see any code or error when viewing 360 view. Not sure if the installed camera would cause a need for recalibration. This was expensive, I’m sure it is more than ford is saving by not including them. They should have an option for retaining the decontent items every year as I would have paid for the things they got rid of. Now I have the main item I didn’t know was missing until after I ordered my 26. Thanks for those that have helped with forscan, photos and videos.

 

[pablo94sc]

Finally got the mirrors with signals that should have been stock on the ‘26. This was an easy install but I did snap a small piece of the mirror cap tab. I added them in forscan and they appear to be working correctly. I swapped the cameras from stock so I didn’t see any code or error when viewing 360 view. Not sure if the installed camera would cause a need for recalibration. This was expensive, I’m sure it is more than ford is saving by not including them. They should have an option for retaining the decontent items every year as I would have paid for the things they got rid of. Now I have the main item I didn’t know was missing until after I ordered my 26. Thanks for those that have helped with forscan, photos and videos.

What are your plans for the original mirrors? I really just want to examine the aluminum arms for some ideas I have, but haven't found any wrecked Rangers in the u-pull-it yards near me yet.

Sponsored