New Product Launch: Ranger MOLLE Bed Panels + Exclusive Ranger6G Discount

[gonzo117]

Hi Brit, can you give me an update on my order?
Order S-1035
Confirmed Jun 30

Thanks

Sponsored

 

[Aberk25]

Same question here, order #S-1038

 

[AdventureLab]

The orders in question, 1035-1039 are all in the next batch to finish production. These are not built to order; we do build them to stock, but the initial sales exceeded my batch size, so we had to increase that batch size. I expect the next batch to be ready to ship mid-week this week. Subsequent batches are already in production to avoid this delay in the future.

Also, I apologize for the delay in replying to you guys. I don't have a lot of time to spend on the forum here and when I do, it comes in spurts. If you guys need a more consistent way to ask questions and get updates, please reach out to our customer service team - 385.202.4188 or [email protected]. I'm glad to answer any questions, but the responses may be delayed occasionally.

 

[Aemonn]

This right here is how to properly communicate! It's great to see AAL products have strong demand. This means there will be greater chance of more Ranger products in the future! Also great to see up front communication. Not often seen when things are scaling faster than anticipated.

Kudos!

 

[clarke]

I'm hoping they get some more molle accessories for the panels, like some competitors have. I'm sure they could implement some of the attachment/accessory ideas, with their own spin. A place to store your trailer hitch would be awesome, that way it's not just rolling around in the back of the bed.

 

[SubNuke]

I'm hoping they get some more molle accessories for the panels, like some competitors have. I'm sure they could implement some of the attachment/accessory ideas, with their own spin. A place to store your trailer hitch would be awesome, that way it's not just rolling around in the back of the bed.

Gas tank and fire extinguisher are on my list of reasons for Molle panels.

 

[Aemonn]

I'm hoping they get some more molle accessories for the panels, like some competitors have. I'm sure they could implement some of the attachment/accessory ideas, with their own spin. A place to store your trailer hitch would be awesome, that way it's not just rolling around in the back of the bed.

Something like this?

 

[clarke]

Something like this?

I didn't want to be the one to link a competitor's product, but exactly that one. ?

 

[clarke]

Gas tank and fire extinguisher are on my list of reasons for Molle panels.

I had completely not thought of fire extinguisher! I'll need to 3D print a mount in the mean time.

 

[Aemonn]

I didn't want to be the one to link a competitor's product, but exactly that one. ?

It's not linked, just a photo. You can search on amazon for "hitch storage bracket" for affordable options that you could likely get to work. Of course wont be as ideal as a purpose designed piece of kit from AAL for their molle panels.

The whole point of a molle panel is flexibility in attaching a variety of things. I can't imagine they went through the effort of using standardized spacing and then expect folks to not use a variety of products from a range of manufacturers. If anything, it helps sell their products.

 

[AdventureLab]

This right here is how to properly communicate! It's great to see AAL products have strong demand. This means there will be greater chance of more Ranger products in the future! Also great to see up front communication. Not often seen when things are scaling faster than anticipated.

Kudos!

Thank you! AAL has grown significantly in the last year and we have taken a ton of steps to rebuild the software foundation of the business. The new ERP/MRP install kicked us in the tail for about 6 months, as expected, but we're humming now! It's great to have a system we can tweak based on trending sales like this. Our team has really done a great job putting everything together.

 

[AdventureLab]

It's not linked, just a photo. You can search on amazon for "hitch storage bracket" for affordable options that you could likely get to work. Of course wont be as ideal as a purpose designed piece of kit from AAL for their molle panels.

The whole point of a molle panel is flexibility in attaching a variety of things. I can't imagine they went through the effort of using standardized spacing and then expect folks to not use a variety of products from a range of manufacturers. If anything, it helps sell their products.

Let me know what you need! The accessories are super easy.

 

[AdventureLab]

I had completely not thought of fire extinguisher! I'll need to 3D print a mount in the mean time.

We have you covered! - https://americanadventurelab.com/product/aal-billet-quick-release-fire-extinguisher-bracket/

 

[AdventureLab]

Gas tank and fire extinguisher are on my list of reasons for Molle panels.

We sell this one now, but we can definitely make something more fitting for the MOLLE panels. Would the NATO jerry cans work?

https://americanadventurelab.com/product/universal-nato-jerry-can-mount/

Also, hopefully you noticed, but we already put the square holes in the panels for the Rotopax mounts.

 

[SubNuke]

We sell this one now, but we can definitely make something more fitting for the MOLLE panels. Would the NATO jerry cans work?

https://americanadventurelab.com/product/universal-nato-jerry-can-mount/

Also, hopefully you noticed, but we already put the square holes in the panels for the Rotopax mounts.

I was hoping for a Jerry can, but rotopax was a backup

Sponsored