Ranger6G Gets the Jump – 30% OFF ALL ITEMS, 24 Hours Before Anyone Else!

[SoulMafia]

Yes.

North American XLT Trim Level?

Sponsored

 

[Signature Lux]

Yes, that is why there is a non-matrix version. We developed it especially for your trim level.

 

[SoulMafia]

Thanks, just ordered a set!

 

[ntbruncie]

Just ordered the fog lights and glove box organizer. One thing to mention - shipping is pretty expensive and the order is charging for separate shipping on each item, which adds up.

Hopefully your fog lights come in correct. I order a set of yellow for my xlt and when they arrived the box did say yellow but after installing them I found out they were white. I let signaturelux know and they are supposed to send me the correct lights that was roughly 2 weeks ago and I haven’t heard anything since from them.

 

[tpack424]

Hello @Signature Lux ,

Do your mudflaps fit the North American XLT Trim Level (i.e. non Raptor)? What is the install process and are you able to adjust how much they stick out easily?

 

[KrillOill]

Do you guys ship from the U.S.? I have a couple of things in my cart and shipping only shows $17. I'm worried the items will be shipped from outside the U.S. and I will be hit with tariffs at some point.

 

[Aemonn]

Do you guys ship from the U.S.? I have a couple of things in my cart and shipping only shows $17. I'm worried the items will be shipped from outside the U.S. and I will be hit with tariffs at some point.

They do not. My order shipped from overseas. However, as long as it's under $800, the de minimis are still exempt until the 29th of this month (August). As long as it ships and is recorded as shipped before then, you should be good.


Items from China, however, were removed from the de minimis exemption on May 2nd. Ask me how I know. It's really becoming important for retailers to note if items are drop shipped from outside the country. Currently contemplating a charge back on an order for something that was drop shipped from China for this very reason.

*%$# tarrifs.

 

[Ag3ntC00p3r]

I emailed you guys about an order and never heard anything.

The drl kit I bought, on the left side the drilled guide hole was very off and the board wouldn't fit. the nub that every one was breaking off early on or did different kits is the guide that wouldn't fit.

also kind of disappointed overall because the DRLs are so yellow, especially compared to the 4 piece amber 'Versatile Grille lights'. In your photos for the DRLs they look to almost match the grille lights, but the color is so different in real life with the grille leds being a good deep amber and the DRLs being almost traffic light yellow.

above is what it actually looks like, this photo is what I and anyone else iv shown see and below is what's advertised

This is slightly concerning. I just ordered the grille lights because I also assumed they would match the DRLs. If they don't, I would have just waited for the F150LEDs version releasing soon.

I've had the DRLs installed from launch batch (had to remove nub on heatsink) and they do not look as yellow as your picture above.

 

[John E Davies]

FYI- directly over the center stack vent is a really really bad location for any electronics or phone, it can get toasty hot when the direct sun hits it. I had a gps mounted close by (but not right over it) and it overheated so badly that it shut down for 30 minutes. I think it is poor practice to advertise that tray with a phone in it….. especially one that is not secured in any way. Use a clip on holder please.

John Davies
Spokane WA USA

 

[GLW]

Darn! I just ordered the Lava and waiting to receive it.

Received my DRL’s yesterday and got one done today. Ran out of time but will get the drivers side done tomorrow.

A few things to consider:
1. Not copper as others received but aluminum. Not happy.
2. Has the 4 holes required for the OEM pins but the holes did not line up with the OEM pins. I was able to enlarge two of the holes with a drill and made it work. Not happy.
3. Did not appreciate paying full price and then get an email about being on sale before I even received the item. Not happy.
4. The light this thing puts out is just beautiful! Very happy and negates the first three.

Tip: use a metal shop pick to push in the two square tabs on the harness connector. No need to use your nail or hold your mouth at a certain angle. Push the tabs in and it just popped out. Probably the easiest part of the install.

 

[Aemonn]

Received my DRL’s yesterday and got one done today. Ran out of time but will get the drivers side done tomorrow.

A few things to consider:
1. Not copper as others received but aluminum. Not happy.
2. Has the 4 holes required for the OEM pins but the holes did not line up with the OEM pins. I was able to enlarge two of the holes with a drill and made it work. Not happy.
3. Did not appreciate paying full price and then get an email about being on sale before I even received the item. Not happy.
4. The light this thing puts out is just beautiful! Very happy and negates the first three.

Tip: use a metal shop pick to push in the two square tabs on the harness connector. No need to use your nail or hold your mouth at a certain angle. Push the tabs in and it just popped out. Probably the easiest part of the install.

is the color orange or more yellow like the recent post earlier in the thread?

 

[GLW]

is the color orange or more yellow like the recent post earlier in the thread?

I’ll get a better idea tonight but it looks like it matches the Sig Lux grill lights I installed last year.

 

[SubZombie]

Wish I had seen this >.< I totally would have picked up the Lava DRL Conversion. Next time!

Sponsored