RIVAL Aluminum Accessories Ranger 6G

[RIVAL 4x4]

So far so good on Raptor.
Still not in the USA, but tested in Mexico and Peru.

US Ranger Raptor is scheduled to be tested next week if not rescheduled.

Anyone with “non-Raptor” Ranger around Houston/Dallas/Austin…. ?

Sponsored

 

[RIVAL 4x4]

 

[LFRR13]

@RIVAL 4x4 when can I order the complete set for the Ranger Raptor? I am located in New York, USA and take delivery in one week. I will gladly order ASAP.

 

[HighDesertRanger]

That's the factory skid plate and then your under body protection?

 

[RIVAL 4x4]

That's the factory skid plate and then your under body protection?

Yes, for Raptor we will be releasing 4 skids in total - engine skid (sits next to factory skid, replaces 0.1in thin steel one), transmission, transfer case, gas tank.

Our 1/4in thick aluminum replacement for factory front skid is coming later this year.

 

[RIVAL 4x4]

Busy day here in TX today testing our Australian kit on US Ranger Raptor.

We will be releasing engine and gas skid plates to the US market shortly, and then transmission and transfer case skids a bit later as there are minor chassis differences.

 

[RIVAL 4x4]

@RIVAL 4x4 when can I order the complete set for the Ranger Raptor? I am located in New York, USA and take delivery in one week. I will gladly order ASAP.

Not sure about full sets, we will be performing some mods to 2 of 4 skids so those might take couple months.

 

[LFRR13]

Not sure about full sets, we will be performing some mods to 2 of 4 skids so those might take couple months.

what are the minor differences?

 

[RIVAL 4x4]

what are the minor differences?

Holes locations , threads

 

[HighDesertRanger]

Holes locations , threads

Thats too bad. You'd really think they would be identical.

 

[Clay6GRanger]

Do these bumpers retain the factory adaptive cruise functionality?

 

[pablo94sc]

Bumper looks good and winch compatible. Does it increase approach angle as well?

 

[telenerd]

For your skids would you consider increasing the following skid in highlights. The cross members on my Bronco are nortious for catching on rocks. I went with full belly pan skids because how much the stock plates didn’t protect and got hung up on things. See attached pics.

 

[RIVAL 4x4]

Do these bumpers retain the factory adaptive cruise functionality?

Yes, the whole sensors just get relocated into the bumper in the same spot. No issues discovered on our test vehicle so far (under tough Australian road safety regulations).

 

[RIVAL 4x4]

Bumper looks good and winch compatible. Does it increase approach angle as well?

The angle remains about the same since our recovery points are mounted in the same chassis locations so the overall approach remains the same.

Sponsored