RRW Wheels

[Rousseb90]

Had this brand on my Tacoma. I’m leaning towards them when they release the new offsets paired with a 315 tire and an RPG 2.25” level. Monoforged will drastically reduce wheel weight. Anybody else have plans for this wheel?

Sponsored

 

[RaptorMike]

Was thinking of reducing some unsprung weight but wanted to keep the same wheel size. Do you or anyone know how much the oem non bead lock wheels weigh? These look nice. Definitely post pics!

 

[Rousseb90]

Was thinking of reducing some unsprung weight but wanted to keep the same wheel size. Do you or anyone know how much the oem non bead lock wheels weigh? These look nice. Definitely post pics!

32.05lbs is what I read.

 

[NASSTY]

Had this brand on my Tacoma. I’m leaning towards them when they release the new offsets paired with a 315 tire and an RPG 2.25” level. Monoforged will drastically reduce wheel weight. Anybody else have plans for this wheel?

I'm not crazy about that particular wheel but I'd be interested to see what other styles RRW has.

 

[Slyder]

I'm not crazy about that particular wheel but I'd be interested to see what other styles RRW has.

Here's the link to the Ranger section of their wheel selection.

The wheels in the Bronco section will work also.
A lot of their wheel choices have negative offsets, so watch for that. They don't have many choices in the +0 to +25 range.

 

[v8 goat]

Was thinking of reducing some unsprung weight but wanted to keep the same wheel size. Do you or anyone know how much the oem non bead lock wheels weigh? These look nice. Definitely post pics!

The non-beadlock wheels weigh about 28 lbs each. The beadlock wheels weigh about 37 lbs each.

I just put on some RTR EVO 6 wheels that are 17x9 +30 (they also offer 0 offset). Those were 22 lbs each. I went with the Good Year Territory MT (Bronco Sasquatch tire) in a 315/70/17 (54 lbs each).

In total, I went from 94 lbs (stock BFG and beadlock) to 76 lbs.

 

[RaptrJr]

I ordered some wheels from their monoforged pre-order. But not the wheels from OP

 

[Rousseb90]

Which ones did you pre order?

 

[Rousseb90]

I ordered some wheels from their monoforged pre-order. But not the wheels from OP

Which ones, and offset?

 

[Jabberwocky]

Here's the link to the Ranger section of their wheel selection.

The wheels in the Bronco section will work also.
A lot of their wheel choices have negative offsets, so watch for that. They don't have many choices in the +0 to +25 range.

I'm really liking this version of the wheels. I assume if I would want these to fit the stock K03's I would need to go with the 0 offset, correct?

 

[Slyder]

I'm really liking this version of the wheels. I assume if I would want these to fit the stock K03's I would need to go with the 0 offset, correct?

Yeah, the 0 offset is the one you want.

The -12 will also work, but it will push the edge of the tire past the outside of the fender flare giving you 'poke' (which some States have laws regarding how much, if any, is allowed).

I'm not a fan of 'poke', plus my State has laws regarding it, so I tend to look for wheels with 0 offset max.

I'll be going with RTR +30 Evo6's once they come back in stock.

 

[Jabberwocky]

Yeah, the 0 offset is the one you want.

The -12 will also work, but it will push the edge of the tire past the outside of the fender flare giving you 'poke' (which some States have laws regarding how much, if any, is allowed).

I'm not a fan of 'poke', plus my State has laws regarding it, so I tend to look for wheels with 0 offset max.

I'll be going with RTR +30 Evo6's once they come back in stock.

Good to know, thank you. I'm kinda new to the truck world. I also don't like the poke look either. I've been eyeing the following brands RRW, 52fifteen, and the Roush Iridium wheels, since I am not a big fan of the OEM beadlock wheels. Would be nice to relieve some weight by going with lighter wheels as well.

 

[Slyder]

Good to know, thank you. I'm kinda new to the truck world. I also don't like the poke look either. I've been eyeing the following brands RRW, 52fifteen, and the Roush Iridium wheels, since I am not a big fan of the OEM beadlock wheels. Would be nice to relieve some weight by going with lighter wheels as well.

I don't remember the weight of the Roush wheels, but I think they're relatively close to the factory standard Ranger Raptor wheel weight. (which I 'think' is around the 30lbs range)

The RRW wheel you like is 24lbs.

Most of 1552's offroad wheels run between 23 to 26 lbs. (I think Patrol_HD, and Analog_HD are the lightest ones)

The RTR ones I like are in the 24 to 26lb range.

Vorsteiner makes some decent wheels, but most run the 0 offset. If they're ever in stock.

 

[Rousseb90]

Ordered a set of RR7-H (17x8.5r17) in a 0 offset from 88 Rotors Offroad. $249 a wheel using discount code : RRWLABORDAY

 

[RaptrJr]

Which ones, and offset?

+25 offset

Sponsored