Sponsored

Redline Tuning Hood Struts installed

Neil S

Well-Known Member
First Name
Neil
Joined
Mar 28, 2019
Threads
6
Messages
89
Reaction score
35
Location
TN
Vehicle(s)
2025 Ranger Lariat FX4, 2005 Ford Explorer Sport-Trac XLT 4x4
Occupation
EHS Manager
I just installed these Redline hood struts, on my 25' Lariat FX4, and they were pretty simple to instal but, kinda a PITA. The lower bolt is a little hard to remove and replace with the rear bracket. Just hold onto the bolt otherwise it will dissappear between the inner/outer fender (A little masking tape helps keep the bolt in place)..

When installing the struts after both brackets are installed, it requires the hood to be raised higher than the prop rod. This is where person #2 comes in handy. It took me more time to find a deep well 13mm socket and a regular 13mm socket than almost the whole install.

End result is a smooth opening/closing hood without the PITA prop rod!

Ford Ranger Redline Tuning Hood Struts installed 1757532793537-i9
Sponsored

 

SKFlaten

Member
First Name
Steve
Joined
Jun 11, 2024
Threads
0
Messages
11
Reaction score
8
Location
CA. (not my choice)
Vehicle(s)
'08 Bullitt, '10 & '20 Fusions, '24 Ranger 2.7 FX4
Occupation
Retired
I just installed these Redline hood struts, on my 25' Lariat FX4, and they were pretty simple to instal but, kinda a PITA. The lower bolt is a little hard to remove and replace with the rear bracket. Just hold onto the bolt otherwise it will dissappear between the inner/outer fender (A little masking tape helps keep the bolt in place)..

When installing the struts after both brackets are installed, it requires the hood to be raised higher than the prop rod. This is where person #2 comes in handy. It took me more time to find a deep well 13mm socket and a regular 13mm socket than almost the whole install.

End result is a smooth opening/closing hood without the PITA prop rod!

1757532793537-i9.webp
I'm really sorry you had such a hard time finding those 13mm sockets. 1/2" SAE would have worked fine, they are the same size and available just about anywhere. Also another common size is an 8mm, you can use a 5/16" SAE. Next time you need metric, check out a conversion chart, there are several metric and SAE wrenches and sockets that are interchangeable.
And, thank you very much for the info, I believe those struts will be my next upgrade.
 

Mitch

Member
First Name
Mark
Joined
Mar 12, 2019
Threads
0
Messages
10
Reaction score
9
Location
Tri City area of Tn
Vehicle(s)
2025 RR,struts,UPRcan,Bedcover,Bedmat,
Occupation
Retired
I did the same, but with different brand on Amazon(China,half the price) My instructions suggested a cloth be put in the fender gap to catch the bolt if you dropped it. I like the added height of the hood. Pops right up.
 

boraxman

Well-Known Member
First Name
David
Joined
Dec 8, 2024
Threads
9
Messages
194
Reaction score
241
Location
Santa Clarita, Ca. USA
Vehicle(s)
2024 Ranger Raptor
Have these myself, great mod.
Sponsored

 
 







Top