Custom Amp Rack from Adventure Lab

[DaStockRR]

Good question. Maybe @DaStockST could pull a measurement on what it is now. Looks like I could add about 20mm of depth to it pretty easily.

I’ll take some measurements

Sponsored

 

[AdventureLab]

This would be pretty cool, if there was enough room for it. I could even make the back flange of this MOLLE pattern so you could attach air tools/hose/etc.

We need about 120mm (4.75") from the back wall to the back of the seat to fit the ARB single.

 

[AdventureLab]

This may also be possible! I have our Rear Seat Delete drawn to almost exactly where the back of the seat is and at this location, the compressor clears the seat.

We would only be able to do this for the new ARB Dual Brushless Compressor, though. If you notice in the model I used here in the video, the output for the compressor would be buried in the seat. That output will rotate slightly, so it may be possible, but the new brushless compressor has the fitting on one end and is a little more flexible with mounting.

 

[iBrad81]

I swear I emailed you guys months ago about doing something like this

 

[AdventureLab]

I swear I emailed you guys months ago about doing something like this

Definitely could have. Those emails are answered by our customer service team. They keep a list of requested products and we meet about those when there are multiple customers interested in something. It could be that there just wasn't anymore interest at the time.

Maybe this will spur the interest.

I'm super curious about the brushless fitting. It is packaged a little tighter than the brushed compressor. I'll probably make one and throw it into ours to see if we can get it to fit.

Brushless

 

[Slyder]

I should've been more specific with the compressor, but the ARB brushless was the one I had in mind when I posted earlier.

Alternative mounting options for compressors is a good idea, for me at least.

 

[iBrad81]

Definitely could have. Those emails are answered by our customer service team. They keep a list of requested products and we meet about those when there are multiple customers interested in something. It could be that there just wasn't anymore interest at the time.

Maybe this will spur the interest.

I'm super curious about the brushless fitting. It is packaged a little tighter than the brushed compressor. I'll probably make one and throw it into ours to see if we can get it to fit.

Brushless

sorry was talking about the the rack for an amp

 

[just a guy with a truck]

It definitely could be. I assumed it would be a one-off, but if anyone else wants one, please let me know. We can get it added to the site.

id be interested in one! saves me lots of time!

 

[ZombieDropper]

Shout out to American Adventure Lab @AdventureLab for building a custom amp rack for me while they were bringing the rear seat delete to market. Awesome quality and exceptional customer service!

Shout out to American Adventure Lab @AdventureLab for building a custom amp rack for me while they were bringing the rear seat delete to market. Awesome quality and exceptional customer service!

Definitely a nice bracket. I made something similar out of flat stock that anyone could do in the garage. 1/4" thick aluminum so it could be tapped for threads. It bolts down to the old subwoofer holes and is very sturdy. I made a smaller plate for the LOC that mounts it right above the factory amp. If your amp allows for end brackets like the Kicker this would be a good option.

 

[Antman450]

I would buy one if you guys make one, so sign me up as well.

 

[AdventureLab]

I would buy one if you guys make one, so sign me up as well.

Will do! Wish I could get a truck in here that already had the seat installed. We're prepping ours for the Raptor Rally, so not too keen on tearing it back apart right now. Any takers? St George, UT.

 

[Antman450]

Will do! Wish I could get a truck in here that already had the seat installed. We're prepping ours for the Raptor Rally, so not too keen on tearing it back apart right now. Any takers? St George, UT.

I take it you mean the back seat is still installed. I will be in Pahrump next Saturday for a motorcycle track day. It's about 2.5 hours from St George. Maybe we can figure something out, send me a DM.

 

[TrevorM]

+1 interest in an amp rack for RR

 

[AdventureLab]

I take it you mean the back seat is still installed. I will be in Pahrump next Saturday for a motorcycle track day. It's about 2.5 hours from St George. Maybe we can figure something out, send me a DM.

Yes, with the seat still installed. Would you be coming through St George on Friday? We typically head out on the trail on the weekends.

 

[boraxman]

+ 1 for one like in the first post - need one yesterday, have everything else for my install.

Sponsored