ADD Edge Bumper + Nacho Grande Supreme 100 Lights installed

[Slyder]

I don't want to completely thread-jack the op's thread, so I'll just quickly comment on some of the stuff the video covered. ( I should just make my own thread, but I keep forgetting to get decent pictures of the truck)

1) I have a '24, so the end sensor plugs don't affect me, but after seeing what ADD supplied as a 'solution' isn't that good at all.

2) The sensors you have to remove from that trim panel and how they want you to install them is bad design choice. I ended up using better double face tape and then put JB Weld epoxy on them and it's held up decent so far. If it starts giving me trouble, I'll most likely look into boring out the holes just big enough to fit one of those sensor retainers he had. (something that shouldn't need to be done with the cost of the bumper)

3) How the bumper is bolted on could've been approached better and that's something I'm going to look into as I get the time, but it's fairly stout given how you mount it, but how it'll hold up in an accident/collision or brush with a rock trail crawling is unknown.

Sponsored

 

[RaptrJr]

That's a shame. Its the best looking bumper out right now, but that changes my mind on it especially for the money.

 

[sikedsyko]

What the hell with that sensor solution. Did they laser cut a bunch of steel and forget to add the detail for that sensor, but fabricated and sold them anyways?

 

[Johnsinraptor]

Bumper looks great! The airflow does bother me a little bit not going to lie but it looks like there's some areas in the skid plate to let some air flow too which is nice! What did you do with the fog light wiring? I assume it just gets tucked away somewhere?

Not trying to thread jack are there any pictures with the Baja Designs LP4's? All my lights are BD so that's the light I would get.

there is a guy on instagram with the ADD and BD LP4's installed on his truck... i have this exact setup and i am considering selling it its still all new in the shipping box

 

[too.many.tacos]

Looking for some part numbers from the parts he used on video #2. He got some sensors and keepers for the front two holes. Also what size bit was that he cut the hole with? He won’t answer his comments.

 

[modified_rraptor]

Just get the Nacho lights, they are superior in brightness anyways.

 

[Daweism]

My turn!

 

[Havasu RR]

I finally got around to installing my ADD Edge front bumper paired with 4 x Nacho Grande Supreme 100 lights in the bumper and 2 x Nacho Quattro Supreme lights on the a-pillars to replace my Diode Dynamics SS3 Max. The light output is incredible.

A few people have commented on the lack of “intercooler flow”, if you’re in that boat, this bumper isn’t for you because no one can change your mind. We drive a ranger raptor not a drag car looking for tenths in the 1/4 mile. However I do live in one of the hottest parts of Arizona and I can’t differentiate from before or after the bumper install on my pulls getting onto the freeway/desert running.

Anyways, feel free to ask me any questions you may have!

I didn't think the grandes would fit!

 

[Havasu RR]

II watched that video and then ordered the bumper

 

[Daweism]

Looking for some part numbers from the parts he used on video #2. He got some sensors and keepers for the front two holes. Also what size bit was that he cut the hole with? He won’t answer his comments.

Msg him on instagram.

 

[too.many.tacos]

Msg him on instagram.

What is that? I haven’t seen his IG

 

[Daweism]

What is that? I haven’t seen his IG

You really gonna make me say it lol

 

[too.many.tacos]

You really gonna make me say it lol

So Jurgen Scott on YouTube is Modified RRaptor on IG?

I’ve messaged ModifiedRRaptor about the sensors and he said he had a shop install it.

Jurgen Scott did his own install. In which the video I was referencing.

 

[Daweism]

So Jurgen Scott on YouTube is Modified RRaptor on IG?

I’ve messaged ModifiedRRaptor about the sensors and he said he had a shop install it.

Jurgen Scott did his own install. In which the video I was referencing.

Oh, I thought you were referring to this thread's OP.

 

[modified_rraptor]

Hey guys, I’m not Jurgen Scott but I do have my instagram @modified_rraptor. Feel free to message me on there. I did have some issues with the way the shop installed the bumper for me, but after I got underneath and redid it myself I since haven’t had any random parking sensors going rogue.

Sponsored