F150LEDS

[jazpdx]

WARNING! These lights require a 7/16 hole in a blind small space. I was successful on 2 then the drill grabbed and destroyed my grill. Their design required the large hole because of the large connector. Why risk it. Cut off the connector and splice. F150leds AI ass does not know if it voids warrenty, go figure. It is $350 bucks for a knockoff grill. F150 now knows this if they are willing to give me any compensation.

Sponsored

 

[Shadow Black Ranger Rapto]

Those plugs are huge compared to the wires they use. I did cut off the plugs and splice the wires For my install.

Sorry to see the damage to your grill.

 

[smokinjoe64]

WARNING! These lights require a 7/16 hole in a blind small space. I was successful on 2 then the drill grabbed and destroyed my grill. Their design required the large hole because of the large connector. Why risk it. Cut off the connector and splice. F150leds AI ass does not know if it voids warrenty, go figure. It is $350 bucks for a knockoff grill. F150 now knows this if they are willing to give me any compensation.

Yeah, echo same findings...was an early adapter; circa Jan 25.
F150 LEDs compatibility, fitment certainly not OE for RR. For instance, LEDs do not sit in slots consistently flush with/3M tape. Modification requirements to grill are 'ugly' and prone to permanent damage [ie drilling, filing].
Not sure if F150 LEDs redesigned to 'fix' fitment issues exist now; however, many more AM alternatives out there that seem better overall.

 

[Watchdog62]

Yeah, echo same findings...was an early adapter; circa Jan 25.
F150 LEDs compatibility, fitment certainly not OE for RR. For instance, LEDs do not sit in slots consistently flush with/3M tape. Modification requirements to grill are 'ugly' and prone to permanent damage [ie drilling, filing].
Not sure if F150 LEDs redesigned to 'fix' fitment issues exist now; however, many more AM alternatives out there that seem better overall.

I screwed up mine a bit, mostly because I got impatient and did not drill a small pilot hole first as was suggested here. Fortunately a little black 1/2" rubber edging covered up nicely.
On the positive side the lights are nice and bright. Also look nice daytime unlit.

 

[Shrek The Raptor]

Yeah, echo same findings...was an early adapter; circa Jan 25.
F150 LEDs compatibility, fitment certainly not OE for RR. For instance, LEDs do not sit in slots consistently flush with/3M tape. Modification requirements to grill are 'ugly' and prone to permanent damage [ie drilling, filing].
Not sure if F150 LEDs redesigned to 'fix' fitment issues exist now; however, many more AM alternatives out there that seem better overall.

Installed mine ~ 3 months ago, they still don’t fit the outside slots. Center is fine but the outside ones taper and they don’t fit well.

 

[smokinjoe64]

Generally, look good 'from a distance'... jus hate the unnecessary effort, mods required to do so.
I'm an attention to detail guy, so those 'imperfections' cannot be unseen

Sponsored