17x8.5 +25 with 35” tires and jumps

[live_discover]

Is anyone running 17x8.5 +25 with 35” tires that has jumped their raptor with that setup? From my understanding it will rub and potentially rip the fenders flares off but maybe someone has experienced this and can enlighten me on trimming or anything needed to do to do this…other than aftermarket wider fenders.

Sponsored

 

[Lion77]

I forget the forum member, but he has +25 offset and 35's (34.5" diameter, not true 35's) on his RR, he did the GOAT 2" F / 1" R strut spacers and removal of crash bars, he posted a video of him jumping with just a SMIDGE of rub on full compression with the tire ballooning out at the side walls (reduced pressure to I think 25 psi), so that was really a worst case and the rub was very mild at the top edge of the fender, so no damage.

If you run 35's and jump it, you need a 2" lift front, 1" rear. For 34's, you need a 1" front lift minimum. For just street or wheelin', you can get away mostly with removing crash bars and some trimming.

 

[nate.co]

Pretty sure it was @Freedom Chariot

Sponsored