Black Rear Tailgate Ford Oval Emblem

[RangerDangerStranger]

Would the black out emblem offered for the 5g (2023) work?

No, wrong size.
Ebay has some Aus sets that might work, Same truck.

https://www.ebay.com/itm/4051418079...ziNn/mLgipZi6Mdef9NEatlgew==|tkp:BFBM6tCkn8Rk

Sponsored

 

[RangerDangerStranger]

How did you remove old tape?

Heat it a hair dryer on High, then roll it off with your fingers.

 

[Irony Guy]

No, wrong size.
Ebay has some Aus sets that might work, Same truck.

https://www.ebay.com/itm/4051418079...ziNn/mLgipZi6Mdef9NEatlgew==|tkp:BFBM6tCkn8Rk

Thanks so much!
Appreciated

 

[iBrad81]

Sorry was out of country last week
Yes thats mine in on the site

I taped around the trim so i diding damage and used a thin plastic automotive trim tool, start at one of the clips and go around slowly.
There will be adhesive left so clean that off with an adhesive cleaner like goo gone.

 

[renato23]

The Raptor emblem works on the back. The 5g emblem is a little too small for the front and not sure of the mounts. I think the F150 rear emblem will work on the tailgate too but can't confirm - it looks like it has the same mounts.

that is EXACTLY what I am looking for! Thanks a lot!

And yes, I also think the F150 will work since it has the same mounts on the back. Can someone confirm this information?

The F150 is around 30usd. This Ranger one is around 80usd

 

[fordgt]

Look on eBay, they have black emblems for front and rear. Shipping is kind of pricey since they come from Australia. I think it’s less than $300 for both including shipping.
I had mine blacked out with vinyl for the time being. Waiting until the 25 parts are released for the BAP.

 

[renato23]

Look on eBay, they have black emblems for front and rear. Shipping is kind of pricey since they come from Australia. I think it’s less than $300 for both including shipping.
I had mine blacked out with vinyl for the time being. Waiting until the 25 parts are released for the BAP.

Just need the rear one. I changed my front grille to a raptor style one, so no ford emblem on front.

I had noticed that as well: why can we only find black emblems from australia on ebay?

I googled that exactly part number @Carbon6G posted and found it on US:
https://parts.lakelandford.com/p/Tailgate-Emblem/134658309/N1WZ9942528E.html

I'm considering buying it. Some family members of mine are going to Florida in a few days. I guess I'm going to send it to their hotel.

 

[fordgt]

Just need the rear one. I changed my front grille to a raptor style one, so no ford emblem on front.

I had noticed that as well: why can we only find black emblems from australia on ebay?

I googled that exactly part number @Carbon6G posted and found it on US:
https://parts.lakelandford.com/p/Tailgate-Emblem/134658309/N1WZ9942528E.html

I'm considering buying it. Some family members of mine are going to Florida in a few days. I guess I'm going to send it to their hotel.

Too bad we didn’t figure out the front camera issue before they left for Florida, I could have picked it up ?

 

[NASSTY]

It's pretty easy to take the emblems apart and paint them.

 

[Highspeedplay]

I just did the black flag overlays looks nice very subtle but not the Ford, I have seen someone use black vinly over the factory but, He didnt mention where he got the vinyl from.

I used these . https://www.amazon.com/dp/B0BHFB6ZPN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

 

[renato23]

Too bad we didn’t figure out the front camera issue before they left for Florida, I could have picked it up ?

? They left to São Paulo yesterday and are going to pick a flight to Miami on wednesday. Want me to try sending one for you?

 

[gmarcucio]

I painted both of my emblems front and rear. I blacked out just the chrome areas and left the blue oval background as is.

 

[Tunisian]

Can’t we find them on Aliexpress?

 

[renato23]

Can’t we find them on Aliexpress?

I tried a lot. Found nothing.

 

[VehicleNanny]

I like working with vinyl, so covered most of the badge with a dark gray vinyl, then created the Ford script on light gray vinyl using my Cricut. It seems to go well with my Cactus Gray paint and tones down some of the brightness of the badge.

Sponsored