Bronco fog lights fitment

[Wolfman00]

so i have been looking at the fogs for the bronco to use on my xlt. looks like we use the same 4 hole mount, raptor uses a 3 hole.

here are the fogs im looking at- i want dual function so these are perfect and no extra wiring! that is if they will work.
anyone tried bronco fogs?

https://www.morimotohid.com/Ford-Br..._28tf0NIw-JfGxy70EI8EFPjy6Rsm8PkaApnkEALw_wcB

Sponsored

 

[kishanp35]

Not sure about the bronco fitment. But i can confirm 5th gen ranger foglights fit. I am running diode dynamics ss3 pros. From 5th gen ranger. Ive attached a picture of the oem foglight best i could

 

[Wolfman00]

oh badass, that helps reinforce my research. also opens more options!
thanks for replying with that

 

[ShadowDragon24]

Not sure about the bronco fitment. But i can confirm 5th gen ranger foglights fit. I am running diode dynamics ss3 pros. From 5th gen ranger. Ive attached a picture of the oem foglight best i could

and Im running gen 5 diode dynamics elite series. instead of the ss3 pro's I had on my 2012 escape, so I could upgrade to a new pair later down the road to a set of ss3 max's for my brush guard.

 

[Wolfman00]

hey, we have the exact same truck!
how hard was it getting them in?

and Im running gen 5 diode dynamics elite series. instead of the ss3 pro's I had on my 2012 escape, so I could upgrade to a new pair later down the road to a set of ss3 max's for my brush guard.

 

[ShadowDragon24]

hey, we have the exact same truck!
how hard was it getting them in?

Wasn't bad. I did it sat on the gravel driveway. throught the wheelwell. Turn the wheel to the right for the left side. and vice versa. A lift would be of been nice. But you can do it without taking tires off. Just a few pop clips and move the liner back. I bent mine back and hooked it to the control arm/tie rod to keep it back.

and mines a lil different even running arb dual battery kit that I had to order from aussie land. not available in North America

 

[Wolfman00]

i was looking at baja designs too. now i got too many options, ha.

 

[Nectrium]

Not sure about the bronco fitment. But i can confirm 5th gen ranger foglights fit. I am running diode dynamics ss3 pros. From 5th gen ranger. Ive attached a picture of the oem foglight best i could

Was this a plug and play install?

 

[kishanp35]

Was this a plug and play install?

Yup, plugged right in to the oem connector

 

[M-Yeehaw]

Wasn't bad. I did it sat on the gravel driveway. throught the wheelwell. Turn the wheel to the right for the left side. and vice versa. A lift would be of been nice. But you can do it without taking tires off. Just a few pop clips and move the liner back. I bent mine back and hooked it to the control arm/tie rod to keep it back.

and mines a lil different even running arb dual battery kit that I had to order from aussie land. not available in North America

Did you find the new fog lights pretty much aimed properly out of the box or were some adjustments needed? I have these on the way.

 

[ShadowDragon24]

Did you find the new fog lights pretty much aimed properly out of the box or were some adjustments needed? I have these on the way.

each vehicle is different, so I had to aim them. had to bring them up

Sponsored