Cargo Management System

[Woodsmann]

My truck came with the CMS installed.

Are there any accessories compatible with these rails? Bed divider? Crossbars?

if anyone else has these, what do you use them for?

Thanks.

Sponsored

 

[Novastar]

I got lucky and jumped ahead in build line, the person who backed outs also ordered these so I hope they are compatible with a bed cover and roll bar

 

[Woodsmann]

I got lucky and jumped ahead in build line, the person who backed outs also ordered these so I hope they are compatible with a bed cover and roll bar

Unfortunately, it’s not compatible with some things. Look at the last bullet:

I am getting the Bak Revolver X4s tonneau, which will work. However, my plans for a pivot storage box is out the window.

 

[Novastar]

Unfortunately, it’s not compatible with some things. Look at the last bullet:

I am getting the Bak Revolver X4s tonneau, which will work. However, my plans for a pivot storage box is out the window.

Thank you for the info

 

[Dave S.]

Unfortunately, it’s not compatible with some things. Look at the last bullet:

I am getting the Bak Revolver X4s tonneau, which will work. However, my plans for a pivot storage box is out the window.

I have a Bak cover with the CMS and pivot box. I haven’t had any issues as of yet. If I do the pivot box swings out and lifts off for that one haul. No biggie.

 

[Johnny 5]

I have a Bak cover with the CMS and pivot box. I haven’t had any issues as of yet. If I do the pivot box swings out and lifts off for that one haul. No biggie.

Thanks for posting this reply. I was just getting ready to ask if anyone has installed the cargo management rail system yet and then I saw this thread. I have the soft folding tonneau cover which I prefer over all the other ones for my specific needs but now that I know I can remove the pivot box and use those tie Downs underneath it to tie my cooler to when I need to to carry my cooler. I'm thinking about getting the pivot box storage now. Thank you.

 

[Woodsmann]

I have a Bak cover with the CMS and pivot box. I haven’t had any issues as of yet. If I do the pivot box swings out and lifts off for that one haul. No biggie.

Great info! Thanks. So, just to make sure I understand, you have to swing it out to open it?

one more question: does it stick out farther than the wheel well?

Thanks.

 

[pauln34]

My truck came with the CMS installed.

Are there any accessories compatible with these rails? Bed divider? Crossbars?

if anyone else has these, what do you use them for?

Thanks.

I’ve got the rails and it works fine with the hard folding tonneau cover.

 

[gmpetrie]

I got 4 of these and they work really well

 

[Goldylox22]

Unfortunately, it’s not compatible with some things. Look at the last bullet:

I am getting the Bak Revolver X4s tonneau, which will work. However, my plans for a pivot storage box is out the window.

I got the X4tS cover and have two pivot storage boxes. Works perfect for camping/off-roading gear while maintaining flexible bed space!

 

[Dave S.]

Great info! Thanks. So, just to make sure I understand, you have to swing it out to open it?

one more question: does it stick out farther than the wheel well?

Thanks.

Yes, it sticks out about 3" from the wheel well.

If I slide the one cleat down, I can open it in place. but for now I just swing it out to open it.

 

[Woodsmann]

Yes, it sticks out about 3" from the wheel well.

If I slide the one cleat down, I can open it in place. but for now I just swing it out to open it.

thanks. that concerns me a little because I have to carry 4’ wide plywood. So, I’d have to remove it every time (And find room in the back seat). Does the bracket stick out past the wheel wells?

 

[superj]

if you guys end up taking those cargo rails out to get rid of, send a set to me. i used them all the time for carrying bikes in my old truck and the ranger missing them is a very noticeable issue now

 

[Woodsmann]

if you guys end up taking those cargo rails out to get rid of, send a set to me. i used them all the time for carrying bikes in my old truck and the ranger missing them is a very noticeable issue now

do you have any pics of them in use? Do you use ratchet straps, bungee cords, combo?

thanks.

 

[superj]

i used ratchet straps across from one rail to the other and over the bike frames.

Sponsored