FORScan NA Ranger 6th Gen (2024+) Crowdsourced Spreadsheet

[joordan]

@joordan - What settings did you change for the RPM gauge to look like that?

In forescan you have a number of options, but this is the only one that would work with a v6 diesel. This is not a raptor cluster, it’s the platinum one. Do not think you make raptor looks like this, cause I cannot do the other way around

Sponsored

 

[NOT_RAPTOR]

This might be the thing that finally gets me to fork around with this forscan stuff.

Has there been any movement/update on the nanny seatbelt screen that stays up for entirely too long? I really, really want that nag gone but the potential airbag ramifications deter me.

Correct me if I am wrong, but hit the back arrow on your steering wheel, in the menu select the star/my mode view, and select your options there. That should show any of those screens instead of the seatbelt screen.

I never see the seatbelt screen people complain about often here, and it's because I set up my custom view I have figured out.

I think you are defaulting to the trip/fuel consumption menu and it shows that big seatbelt view.

 

[lharoon]

In forescan you have a number of options, but this is the only one that would work with a v6 diesel. This is not a raptor cluster, it’s the platinum one. Do not think you make raptor looks like this, cause I cannot do the other way around

Ah, that explains it. Been trying to figure out how to get that on a raptor for the longest time now and, obviously, haven't managed to reach the promised land yet.

 

[CACTUSGREYFX4]

@joordan - What settings did you change for the RPM gauge to look like that?

That's also the standard Lariat one for North American ones. At least that's what mine looks like.

 

[Khamsin]

Correct me if I am wrong, but hit the back arrow on your steering wheel, in the menu select the star/my mode view, and select your options there. That should show any of those screens instead of the seatbelt screen.

I never see the seatbelt screen people complain about often here, and it's because I set up my custom view I have figured out.

I think you are defaulting to the trip/fuel consumption menu and it shows that big seatbelt view.

My dash is set up with all the gauges and metrics I want under mymode/R/whatever. I know which screen you’re referring to, but I’m talking about the forced pop-up nag that says to make sure all the belts are fastened. Clicking OK is the only way to dismiss it, unless it eventually times out after 30 seconds, reaches a certain MPH, or something like that.

It’s one of about four pop-up dialogs I have to hit OK on just to get the truck to shut up and show me my gauges: parking brake, auto stop/start disabled, Baja exhaust is off-road only, and then the seatbelt warning.

Eventually they’ll all go away on their own, but I just keep clicking OK until the damn thing finally shuts up and shows me my temps.

This is what I'm talking about.

 

[Hande]

I think these are listed in the spreadsheet, click it open and you will see
With spreadsheet I was getting rid of exactly that.

 

[Khamsin]

They are, but my question (buried a few pages ago) was if we'd confirmed the ramification of air bags. It's mentioned in the sheet and until we know what's up with that, I'll stick with the nag screen.

That said, I'm tempted to crack open forscan anyway if not for anything else but to do the headlight trick.

 

[tisser07]

I have a 2026 Ranger Raptor and I am struggling to enable trail turn assist. I have been able to enable both the Trail Turn Assist and Offroad Menu Trail Turn assist in the non-asbuilt menu. The button displays on my offroad menu, however TTA does not work.

Could someone provide me guidance on the proper ABS setting?

My OEM setting for 760-03-01 is 9B42 C14D FF55

What would I change the ABS values to?

Thanks!

 

[rugedraw]

I have a 2026 Ranger Raptor and I am struggling to enable trail turn assist. I have been able to enable both the Trail Turn Assist and Offroad Menu Trail Turn assist in the non-asbuilt menu. The button displays on my offroad menu, however TTA does not work.

Could someone provide me guidance on the proper ABS setting?

My OEM setting for 760-03-01 is 9B42 C14D FF55

What would I change the ABS values to?

Thanks!

The problem is, the spreadsheet for the Ranger is for a 2024 and it seems like the ABS changed between that model year and yours.

I pulled the ab data off a random 2026 RR and I see this in line 03-02:

Looking at TTA in the spreadsheet for the F150, I see this:

You could try putting a 1 there to see if TTA works.

 

[tisser07]

The problem is, the spreadsheet for the Ranger is for a 2024 and it seems like the ABS changed between that model year and yours.

I pulled the ab data off a random 2026 RR and I see this in line 03-02:

Looking at TTA in the spreadsheet for the F150, I see this:

You could try putting a 1 there to see if TTA works.

Thanks, my 760-03-02 is 0000 6C as well. Are you saying i should leave the default setting in 760-03-01 and update 760-03-02 to 1000 6C? Thanks for the help.

 

[pablo94sc]

They are, but my question (buried a few pages ago) was if we'd confirmed the ramification of air bags. It's mentioned in the sheet and until we know what's up with that, I'll stick with the nag screen.

That said, I'm tempted to crack open forscan anyway if not for anything else but to do the headlight trick.

I have the nag screens turned off on my Raptor. Did it shortly after the thread was posted. You can still go to the seat belt screen in the cluster views, but no nags. Only ones I can't get rid of are ones like rear brake assist off and the normal cruise instead of adaptive one.

 

[rugedraw]

Thanks, my 760-03-02 is 0000 6C as well. Are you saying i should leave the default setting in 760-03-01 and update 760-03-02 to 1000 6C? Thanks for the help.

Yea, that's what I would try.

1xxx --

Write the change and hope it works.

 

[b-smi91]

Can the tire pressure monitor be turned off (TPMS)

Sponsored