Hello ,looking for a 2024 ford ranger xl skidplate kit that will fit this truck

[Ranger #1]

They had the shipping date set around Dec. 30th when i ordered. Expecting it early Jan. Look out for thier Tank plate, when i becomes available, Be a good addition to any Truck.

?

Sponsored

 

[Ranger #1]

Both Rival and a decnt chinese knock off-
https://www.amazon.com/Mabett-Trans...pcontext&ref_=fplfs&psc=1&smid=A3KM57ZUGL8TPX

Rival is only 70 more.

https://www.rival4x4usa.com/product...-skid-plate-ford-ranger-2024-including-raptor

"Hello Ranger Danger Stranger, thanks for your reply, I did a websearch, and it shows the same skid plate with the OEM number MB3Z 5B018 A and MB3Z 7E063 A looks like the transfer case skid, what is the motor skid OEM part number, and what's the Rival Gas tank skid part number, remember I have a 2024 ford ranger xl 4wd with the STX trim ,thanks for your help ,I'm almost have this figured out!"

Don't pay attention to the highlighted plate or picture, those are the correct numbers directly from the Ford parts tags that came with the Plates. that pic with the one highlighted plate always pops up for some reason. You'll gat the right plate it if you order those numbers.

Here is a better breakdown with the parts listed by number, thought the stupid highlight is still there.

https://www.fordoempartsdirect.com/...verglades--2-3l-l4-gas/body--frame-components

These are Bronco parts, but fit. The fronts skid is Silver on the Ranger, and searchable, different fromt the part here in the list.

You may want to get some bolts #2 And #4 as well, sold in packs of 4. price per.

https://www.rival4x4usa.com/collections/ford-ranger

You should have the Skid plate brackets, being it's a 4x4. there are some bolts already installed holding the plastic pieces on that can be used to install the steel plates. Get a few extra though, i think i was short 2. same blots hold the transfer case on, 2 bolts.

Happy new year RangerDangerStranger, just wondering if you got word or received your rival tranmission skid plate

 

[RangerDangerStranger]

Happy new year RangerDangerStranger, just wondering if you got word or received your rival tranmission skid plate

They sent me an e-mail yesterday it was ready to ship. Expect it by next week at the latest.

 

[Ranger #1]

They sent me an e-mail yesterday it was ready to ship. Expect it by next week at the latest.

OK ? keep me posted on that

 

[BlueSport]

Sorry everyone I’m super slow, will the 2019-2023 front ford ranger skid plate fit on a 2024 ford ranger xl stx ?

 

[Ranger #1]

Sorry everyone I’m super slow, will the 2019-2023 front ford ranger skid plate fit on a 2024 ford ranger xl stx ?

Hello ?, go back to page one of this thread ,my first comment OM3Z-5D032k is the part number, it fits everything but the raptor 2024 model

 

[WilliVooRG]

Hello everyone, is it possible to remove stocked air dam (sport 4x4)and install oem metal skid plate MB3Z-5D032-K instead or do I have to install those L and R air dams like (FX4) in order to make the bumper stable?

 

[Carbon6G]

Hello everyone, is it possible to remove stocked air dam (sport 4x4)and install oem metal skid plate MB3Z-5D032-K instead or do I have to install those L and R air dams like (FX4) in order to make the bumper stable?

Yes, you can. I installed the FX4 air dams along with the skid plate but they don't add much stability. The front of the bumper above the skid plate is not supported by anything on stock FX4s so it is a little flimsy even with those air dams.

 

[WilliVooRG]

That’s great, thank you Carbon6G for the info. I wonder what’s there to support the actual Fx4 bumper.

 

[Carbon6G]

That’s great, thank you Carbon6G for the info. I wonder what’s there to support the actual Fx4 bumper.

Nothing that you are removing when the air dam comes off. If I remember correctly, the air dam is held on by just a bunch of small fasteners directly on the edge of the bumper and two torx head fasteners that are located at the fender wheel well moulding, right under the marker light. The torx fasteners connect a few pieces together and is where part of the FX4 air dams attaches.

 

[WilliVooRG]

Nothing that you are removing when the air dam comes off. If I remember correctly, the air dam is held on by just a bunch of small fasteners directly on the edge of the bumper and two torx head fasteners that are located at the fender wheel well moulding, right under the marker light. The torx fasteners connect a few pieces together and is where part of the FX4 air dams attaches.

Ok that’s something to notice, I can’t wait for the parts to arrive and put them on. Thanks

 

[Carbon6G]

If anyone is interested in the FX4 air dams, here are the part numbers. You can reuse most screws that come off the removed air dam. You'll need to source a few extra of similar size for the supports.

Air Dams
N1WZ-17626-BB
N1WZ-17626-CA

Support Brackets
N1WZ-17A861-L
N1WZ-17A861-N

 

[RangerDangerStranger]

OK ? keep me posted on that

I recieved the plate. You were wise to wait, in this case. The plated did not fit. It's 2" too long, and there appeares to be other problems with fitment. I am surmising that someone at Rival took the easy route and assumed that the US ranger was the same as the Global one, and did not try a fitment. I am likely returning mine. It also required removal of the tranfer case Skid plate to install it. ?

 

[Hootbro]

I recieved the plate. You were wise to wait, in this case. The plated did not fit. It's 2" too long, and there appeares to be other problems with fitment. I am surmising that someone at Rival took the easy route and assumed that the US ranger was the same as the Global one, and did not try a fitment. I am likely returning mine. It also required removal of the tranfer case Skid plate to install it. ?

Bummer.

 

[RangerDangerStranger]

Bummer.

Yeah. at this point, I'm not sure what went wrong. Rival seems like a good company. But it's 2" too long. I'm returning it. I'll be interested to see what other peoples experience is with the plates that they get. ?‍

If it was the right length, i could of probably drilled it to make it work with the Transfer case plate. oh well.

Sponsored