Lined glovebox with felt

[HyperM3]

Got tired of hearing junk slide around and make noise in the glove box so I lined it all up with sticky backed felt. Did the tip box too.

Sponsored

 

[pablo94sc]

Where did you get that? Seems like a nice upgrade.

 

[HyperM3]

Where did you get that? Seems like a nice upgrade.

Amazon. Kit came with a couple big sheets. Didn't even use one whole sheet for this.
https://a.co/d/2DGoZQ0

 

[CherryCoke]

I still have some suede self adhesive from when I did glove box in the RS. They should come with at less the bottom felt.

 

[yoopercharged]

Great idea and nicely executed!

 

[jeffers]

Got tired of hearing junk slide around and make noise in the glove box so I lined it all up with sticky backed felt. Did the tip box too.

Everything in my GTI came this way, its surprisingly nice.

 

[HyperM3]

Everything in my GTI came this way, its surprisingly nice.

Well yeah, I missed a little luxury from my previous car(Audi). That being said, I am 100% on board with how much easier this is to work on.

 

[Critical Habitat]

Maybe some fuzzy dice for the RV mirror?
Great idea for the glove boxes. Might also work for the rear underseat storage?
I also liked the idea that someone posted of the paracord grab handles to hang from the rear of the front headrests.

 

[Cyrusblack]

Got tired of hearing junk slide around and make noise in the glove box so I lined it all up with sticky backed felt. Did the tip box too.

Is that black or gray?

 

[HyperM3]

Is that black or gray?

Black. I attached the link from Amazon in post #3.

 

[Hawkpilot10]

Thank you just ordered some.

 

[Cyrusblack]

Thank you just ordered some.

Me too

 

[Cyrusblack]

Black. I attached the link from Amazon in post #3.

Got my felt today. How did you go about measuring and cutting the different areas. Thinking you might have rough fitted it and then trimmed with an xacto knife?

 

[HyperM3]

Got my felt today. How did you go about measuring and cutting the different areas. Thinking you might have rough fitted it and then trimmed with an xacto knife?

I made templates out of cardboard from a used box I had. Cut those pieces down to fit, then traced them on the back of the felt.

 

[Cyrusblack]

I made templates out of cardboard from a used box I had. Cut those pieces down to fit, then traced them on the back of the felt.

Thx - will give that a try and report back to all our fans

Sponsored