Project Msfitoy V3.0

[AzScorpion]

Just waiting for the LUX rock lights to arrive and I'll take a pic at night and see if that's enough to attract Big Foot lol. If I get around to installing rails for the RTT, I'll move the floods at my rear bumper to the side and mount my spare set of spots to replace them at the rear...all in all, I have 2 power slots open on my Trigger 3001. One will switch the rock lights and the other for the side flood. That about covers 360

They should be able to see you on the next space shuttle.

I think I'm not going to mount anything on the roof simply because I want to be able to park this baby in garage. When I do mount the rack for RTT on Diamondback, it'll be the same set up as "Last Line of Defense". He has a cut down rack from Frontrunner that keeps his tent at the same height as roof line. I like that for aero and of course parking in the garage...This is what I'm going after minus the roof rack...the Skycamp Mini fits the short bed and fold out side ways...

That's going to look really good. Looking forward to seeing it al done up.

Sponsored

 

[Sunpilot]

I think I'm not going to mount anything on the roof simply because I want to be able to park this baby in garage. When I do mount the rack for RTT on Diamondback, it'll be the same set up as "Last Line of Defense". He has a cut down rack from Frontrunner that keeps his tent at the same height as roof line. I like that for aero and of course parking in the garage...This is what I'm going after minus the roof rack...the Skycamp Mini fits the short bed and fold out side ways...

That's my intention also. Keep it low enough to get into the garage. That way I can hoist the RTT on and off to my garage ceiling also.

 

[HoosierT]

I think I'm not going to mount anything on the roof simply because I want to be able to park this baby in garage. When I do mount the rack for RTT on Diamondback, it'll be the same set up as "Last Line of Defense". He has a cut down rack from Frontrunner that keeps his tent at the same height as roof line. I like that for aero and of course parking in the garage...This is what I'm going after minus the roof rack...the Skycamp Mini fits the short bed and fold out side ways...

I watch his channel and also love his truck and setup (better it if were a Ranger though ). lol If you are in the market for an RTT right this second, check out the Roofnest Condor. It's in preorder now and is much cheaper than the iKamper but VERY similar. I preordered the larger one to go on my bed rack. It'll extend over the tailgate (similar to the X-cover LLOD was rocking) but I need the room for my family so it is what it is. Hoping to have the tent sometime around the new year so i can go out and break it in on a cold winter camp.

 

[Msfitoy]

I watch his channel and also love his truck and setup (better it if were a Ranger though ). lol If you are in the market for an RTT right this second, check out the Roofnest Condor. It's in preorder now and is much cheaper than the iKamper but VERY similar. I preordered the larger one to go on my bed rack. It'll extend over the tailgate (similar to the X-cover LLOD was rocking) but I need the room for my family so it is what it is. Hoping to have the tent sometime around the new year so i can go out and break it in on a cold winter camp.

Thanks Tyler...I'll check it out

 

[HoosierT]

Thanks Tyler...I'll check it out

You bet! I tease about your abundance of lighting but I really like your truck. It's a sweet looking rig for sure.

 

[El Renno]

Yes

Still working on the LED amber lights. Making brackets as I post...

I went ahead and ordered a Raptor Grille for my Ranger. I got Stage 3 Motorsport's Raptor lighting kit along with it. However, Since I have a Lariat with the white DRL's, and the Raptor lighting kit only comes with amber grille lights, I took your lead and got the lights you used here, except in white instead of amber.

I checked with a local body shop about painting the grille magnetic gray to match the Sport Appearance Package. I also got vinyl F.O.R.D. letters in blue to match the blue of my truck. I highly recommend TVD Vinyl Decals. They make some quality stuff for Rangers, in case anyone wants anything special for their Ranger.

https://tvdvinyldecals.com/collections/ford-ranger

Here's how my baby looks so far.

 

[BDoc]

I went ahead and ordered a Raptor Grille for my Ranger. I got Stage 3 Motorsport's Raptor lighting kit along with it. However, Since I have a Lariat with the white DRL's, and the Raptor lighting kit only comes with amber grille lights, I took your lead and got the lights you used here, except in white instead of amber.

I checked with a local body shop about painting the grille magnetic gray to match the Sport Appearance Package. I also got vinyl F.O.R.D. letters in blue to match the blue of my truck. I highly recommend TVD Vinyl Decals. They make some quality stuff for Rangers, in case anyone wants anything special for their Ranger.

https://tvdvinyldecals.com/collections/ford-ranger

Here's how my baby looks so far.

Love the graphics!

 

[Msfitoy]

The canvas has been prepared and I'm about to be off work for two weeks---Christmas break...Got my 3D model set up...time to have some fun design time

 

[BHunted]

I went ahead and ordered a Raptor Grille for my Ranger. I got Stage 3 Motorsport's Raptor lighting kit along with it. However, Since I have a Lariat with the white DRL's, and the Raptor lighting kit only comes with amber grille lights, I took your lead and got the lights you used here, except in white instead of amber.

I checked with a local body shop about painting the grille magnetic gray to match the Sport Appearance Package. I also got vinyl F.O.R.D. letters in blue to match the blue of my truck. I highly recommend TVD Vinyl Decals. They make some quality stuff for Rangers, in case anyone wants anything special for their Ranger.

https://tvdvinyldecals.com/collections/ford-ranger

Here's how my baby looks so far.

Guy on eBay makes great quality raptor lights with white lens too.

 

[Msfitoy]

My re-creation of Shrock sliders...maybe I'll see it before Christmas

Proper Rally mud flaps...Racks and brush bar with winch next up...

 

[Msfitoy]

I built replica of Tyger basket rack just for a look see...if I end up going with a camp trailer, this might be a good option to sit on my bars...room underneath for couple of Pelican rifle cases too...hmmmm...

 

[MotoWojo]

I built replica of Tyger basket rack just for a look see...if I end up going with a camp trailer, this might be a good option to sit on my bars...room underneath for couple of Pelican rifle cases too...hmmmm...

That's awesome, what type of 3d file are you using?

 

[Msfitoy]

That's awesome, what type of 3d file are you using?

The Ranger is a 3DS Max file purchased from Turbo Squid...I then to create other objects designed in Alias Automotive and rendered out in KeyShot to fill in my fantasy

 

[HoosierT]

I built replica of Tyger basket rack just for a look see...if I end up going with a camp trailer, this might be a good option to sit on my bars...room underneath for couple of Pelican rifle cases too...hmmmm...

Badass.

 

[FULLSCALE]

The Ranger is a 3DS Max file purchased from Turbo Squid...I then to create other objects designed in Alias Automotive and rendered out in KeyShot to fill in my fantasy

I’m jealous! I have zero computer skills, but I’d love to be able to do that!

Sponsored