What did you DO TO your 6G Ranger today? 🧰 🛠️ ⚙️ 🧽

[RRheault_NC]

Today I put the final touch on my '25 Lariat, a 1.5" leveling kit from ReadyLift. My Ranger came out of the factory 3" lower in the front than the rear. After leveling, the front is now 1/4" lower than the rear, which is perfect in my opinion. I also installed Husky Liners rocker panel protectors and pocket style fender flares, with 1.5 " wheel spacers. Eventually, I will install a set of slightly wider tires in 265/65-18, when the original 255/65-18 are worn out in a couple years.

Sponsored

 

[CoryB]

I can share a photo of the adapter tool I made if helpful

Yes, please.

 

[embedded rock]

Your Ranger looks like it is ready for 33's @RRheault_NC

 

[ATestBishop]

Here you are, I'm still researching the specialty extension I have but basically your looking at roughly 7mm square to get a good fit, in my case it has a 1/4" female hex on opposite side. Technically a cheap and available 1/4" square to 3/8" square impact adapter can be ground down to ~7mm square but I may find something that requires no grinding.

 

[jmt8706]

The Muslogy cargo net I ordered was delivered.

 

[el_sabio]

Builtright Molle panels and bulk head accessory rack installed on the RR.

How do you like the Billie Bar tailgate cover and the MOLLE panels? I'm looking between these and American Adventure Lab MOLLE panels.

 

[ATestBishop]

Installed Dragon Fire coils and NGK Ruth HX plugs, they came gapped at ~.030 and Factory plugs were a tighter ~.030. The coils were 14 grams= .5OZ lighter than Factory and had grease pre applied, I don't know how they are in operation yet but it was a simple project to install, hardest part is working with the foam piece near firewall pictured, the separate for service thing is odd though, why doesn't Ford separate it from the start I don't know

 

[Dr. TJG DVM]

Finally had a nice afternoon and some spare time so applied my Tufskinz products from Aspire Automotive. Started with the tailgate letters in black/silver American flag

they go nicely with the blackout KS plate and frame. Liked the idea enough that I ordered a set of the same for the front

The pattern is a little more subtle on the black vs the azure gray tailgate but I think I like the look. Definitely better than rock chips and Kansas bug splats
Finished the afternoon with some rocker panel overlays for front and rear.

Thats my day’s productivity now it’s Old Fashioned time

 

[Maybe]

Finally had a nice afternoon and some spare time so applied my Tufskinz products from Aspire Automotive. Started with the tailgate letters in black/silver American flag

they go nicely with the blackout KS plate and frame. Liked the idea enough that I ordered a set of the same for the front

The pattern is a little more subtle on the black vs the azure gray tailgate but I think I like the look. Definitely better than rock chips and Kansas bug splats
Finished the afternoon with some rocker panel overlays for front and rear.

Thats my day’s productivity now it’s Old Fashioned time

Where do you get the door overlays?

 

[Maybe]

Got these done the other day. Forgot to post here.

 

[scuba mike]

Installed my American Adventure Lab Trailer plug. very easy hardest part was unplugging the plug lol..

 

[Dr. TJG DVM]

Where do you get the door overlays?

Aspire Automotive here’s the link- Ranger Overlays

 

[Bt_okst]

Aspire Automotive here’s the link- Ranger Overlays

Ive bought ftom them too, but you can oder directly from the manufacturer tufskinz. Www.tufskinz.com

 

[gonzo117]

Got these done the other day. Forgot to post here.

Looks great! Is it a decal? Or did you have it done somewhere?

 

[Maybe]

Looks great! Is it a decal? Or did you have it done somewhere?

It’s a decal. Company is on Etsy. Just search 24 for Ranger and it will bring them up with other stuff for our truck. They are the only people who make them

Sponsored