What's your tread depth at 5k on stock KO3s?

[ducktapeonmydesk]

Just passed 5k miles and my tires are down to 11/32. What are you seeing on your stock KO3s?

Edit: apparently I was wrong

Sponsored

 

[Catalyst]

I'm only at 3K miles and haven't measured yet. That's pretty significant wear since they started at 15/32.

 

[ducktapeonmydesk]

I'm only at 3K miles and haven't measured yet. That's pretty significant wear since they started at 15/32.

Yeah, that's why I am asking. I haven't been off-road yet and 90% have been highway miles (50-85mph). I don't do much hard acceleration and try to drive conservatively (~18mpg).

 

[Catalyst]

Yeah, that's why I am asking. I haven't been off-road yet and 90% have been highway miles (50-85mph). I don't do much hard acceleration and try to drive conservatively (~18mpg).

I'll measure mine time permitting even at 3K miles... I mash the fun pedal as often as possible, but do have a lot of highway miles too.

 

[unixadm]

I measured one of mine this morning at 200 miles and it shows 14/32 on my treadwear gauge.

 

[Tank.]

Just had my first service, paperwork indicated 10/32. I have 4600 miles on it, mostly highway.

 

[ducktapeonmydesk]

Just had my first service, paperwork indicated 10/32. I have 4600 miles on it, mostly highway.

Mine was 11/32 at 4,4xx miles, but I just rounded up to 5k.

I am at 5,200 now and have a depth gauge coming from Amazon today. I will check and update when able.

 

[Tank.]

Mine was 11/32 at 4,4xx miles, but I just rounded up to 5k.

I am at 5,200 now and have a depth gauge coming from Amazon today. I will check and update when able.

I was going to do the same to measure for myself so I can confirm what the paperwork said.

 

[ducktapeonmydesk]

Update: I'm not sure if the tech had a bad gauge, but I just measured my tread depth and I am between 13.25 and 14+/32nds (highest my Amazon gauge goes is 14/32nds). I verified the accuracy of my gauge with Mitutoyo calipers.

 

[Tank.]

Update: I'm not sure if the tech had a bad gauge, but I just measured my tread depth and I am between 13.25 and 14+/32nds (highest my Amazon gauge goes is 14/32nds). I verified the accuracy of my gauge with Mitutoyo calipers.

Good to know, thanks for the update. I'll see what mine are next week.

 

[Tank.]

Update: I'm not sure if the tech had a bad gauge, but I just measured my tread depth and I am between 13.25 and 14+/32nds (highest my Amazon gauge goes is 14/32nds). I verified the accuracy of my gauge with Mitutoyo calipers.

Same for me, they measure 13-14/32nds.

 

[schwartzki]

I am at 12/32nds all around at 18,500miles. If the KO3's are anything like my previous KO2's on my 4Runner they will age out/dry rot before I get down to the wear bars.

 

[nullderef]

Mine supposedly measured the following last week when I took it in for servicing.

14/32 14/32
15/32 15/32

 

[ducktapeonmydesk]

I got serviced at 25 or 26k and I was at 12/32

 

[iamweasel]

Mine has 11K miles on it now and just measured the tires, all around 13/32. (Nearly all on pavement.)

Sponsored