Wolfbox pro 3 channel install question

[BrrRaptor]

Has anyone install the 3rd camera under the chassis? I want to mount one pointing forward so I can see if rocks and such are going to clear.
If you have what's the mounting location and any issues with water crossings, mud and such?
Thanks.

Sponsored

 

[mtesni]

Started working on it this week! Still a a long way to go, weather hasn't cooperated this week for me.

Looking to bend up a bracket to mount it along side my gas tank Skidplate. Seems like it will be a decent shot

 

[BrrRaptor]

Started working on it this week! Still a a long way to go, weather hasn't cooperated this week for me.

Looking to bend up a bracket to mount it along side my gas tank Skidplate. Seems like it will be a decent shot

That looks like a very good placement for a good shot to see clearance up front!

 

[mtesni]

Got it all mounted up. Pretty happy with how it came out

 

[BrrRaptor]

Got it all mounted up. Pretty happy with how it came out

Hey, I was wondering where you mounted your external camera's? Also, did you swap out the mirrors with their bracket or did you just use the rubber straps?
Also, where did you get your power source? I was thinking of using the dome lights just above the mirror or sliding rear window switch.
Appreciate any help. Thanks

 

[mtesni]

I replaced the factory mirror completely, used a bracket from eBay and a metal plate from AliExpress as well as the Wolfbox hardwire kit. It's getting powered from a fuse block I have installed behind the rear seat however you can use a fuse tap on the interior fuse panel. I used the factory run/start wire that's left behind under the dash for the accessory trigger. Wiring for power and cameras runs across the headliner and down the A-Pillar. Power terminates near the fuse box, cameras continue along under the trim past the doors to the back seat. The rear camera goes back up the C-Pillar and across the headliner to the camera, the extra camera wiring goes out the factory grommet behind the rear seat and connects near the front of the gas tank.

Rear camera is mounted inside using a bracket from TheDashcamStore.

The extra camera on a bracket I bent up and sandwiched between the Rival gas tank skid plate and it's mount.

 

[BrrRaptor]

I replaced the factory mirror completely, used a bracket from eBay and a metal plate from AliExpress as well as the Wolfbox hardwire kit. It's getting powered from a fuse block I have installed behind the rear seat however you can use a fuse tap on the interior fuse panel. I used the factory run/start wire that's left behind under the dash for the accessory trigger. Wiring for power and cameras runs across the headliner and down the A-Pillar. Power terminates near the fuse box, cameras continue along under the trim past the doors to the back seat. The rear camera goes back up the C-Pillar and across the headliner to the camera, the extra camera wiring goes out the factory grommet behind the rear seat and connects near the front of the gas tank.

Rear camera is mounted inside using a bracket from TheDashcamStore.

The extra camera on a bracket I bent up and sandwiched between the Rival gas tank skid plate and it's mount.

Much appreciated! Nice work you've done there.

Sponsored