Turn signals as DRL lights

[MichealStuff]

Hello,

I have set the turn signals as drl lights when the low beams are on i also programmed with FORScan to le them on. Only problem is when low beam is on the turn signal won’t flash anymore. It does work with low beam of.
any one able to help me solve that?

kind regards Michiel

Sponsored

 

[zedder]

I experienced the same thing. Could not get them to work when the headlights were on.

Have you figured anything out?

 

[HyperM3]

Why do you want your turn signals on all the time? Just curious. What I did was code the wink out. So the LED stayed on instead of turning off when the turn signals are applied.

 

[DesertBumAZ]

Why do you want your turn signals on all the time? Just curious. What I did was code the wink out. So the LED stayed on instead of turning off when the turn signals are applied.

It does look pretty sick, saw someone from Europe had the turn signals solid with the DRLs

 

[HyperM3]

It does look pretty sick, saw someone from Europe had the turn signals solid with the DRLs

Got a picture of what it looks like?

 

[DesertBumAZ]

let me see if i can find the video

 

[DesertBumAZ]

Got a picture of what it looks like?

 

[DesertBumAZ]

Got a picture of what it looks like?

 

[Peter949]

Where is the Forscan code for this? I want to try.

 

[Hummeroid]

Bumping this one- same question as above

 

[DesertBumAZ]

Bumping this one- same question as above

 

[DesertBumAZ]

Left n Right Front turn lamp usage = turn and drl

 

[luckyPad]

Left n Right Front turn lamp usage = turn and drl

Tried this but didnt work for me. What I did is set both Left and Right front turn lamps to "DRL, Turn and Position". But turn lamps stays on and no longer blinks. Hoping someone can share the fix or the correct settings for this.

 

[Muffin1]

Could it be they are incandescent bulbs that are one filament one function type?
You would need a led that has the ability to be a 'park' and 'signal' or even a incandescent that has two filaments for both functions, i want to do this also so I'm researching bulb options.

 

[luckyPad]

Could it be they are incandescent bulbs that are one filament one function type?
You would need a led that has the ability to be a 'park' and 'signal' or even a incandescent that has two filaments for both functions, i want to do this also so I'm researching bulb options.

Good point. But I think its something else since the turn signal blinks when switched the dial to "off" position.

Sponsored