FORScan NA Ranger 6th Gen (2024+) Crowdsourced Spreadsheet

[CrustyNoodle]

there are three buttons. one put you in manual mode, the others when in manual change gears. but if you stay in automatic, and press the +/- button that shows you the gear scale on the dashboard. there is actually another hidden feature with those buttons, which is limiting the gear shift by pressing - in D

Ranger Raptor only has one button on the stick and that is for manual mode only. Instead of the other two buttons on the stick we have flappy paddles for gear changes.

Sponsored

 

[joordan]

Ranger Raptor only has one button on the stick and that is for manual mode only. Instead of the other two buttons on the stick we have flappy paddles for gear changes.

ah that's right, so do not know if you have the same functions out of different button combinations

 

[Border411]

I tried to get rid of the seatbelt message using the "as built" and changing all the values to zeros. However, when I write it some values change back to the previous values. Any thoughts?

 

[Justin_Glen]

I changed the location to Euro/UK and the seatbelt warning disappeared completely.​

 

[Border411]

I changed the location to Euro/UK and the seatbelt warning disappeared completely.​

Where do I do that? I did change something to European (per the spreadsheet )and it got rid of the dinging.... But the message is still there.

 

[RangerDangerStranger]

I changed the location to Euro/UK and the seatbelt warning disappeared completely.​

What module?

 

[Sequoia]

Hello, I’m Dan, and since July 2024, I’ve been driving a Ranger Wildtrak. While searching for Forscan enthusiasts, I couldn’t find anyone in Germany and came across your forum. Wow! Much respect. This is exactly the kind of spreadsheet I’ve been looking for, as well as people working on it! Keep up the great work.
A few days ago, I also set up an old MacBook with Windows via Bootcamp, got myself an adapter, and installed Forscan.

Here are the modifications I’ve made and documented so far:

Approach detection control function and walk away lock does not work

 

[Sequoia]

That's how it works for me on a 2024 Ranger Raptor

I found APIM.. But what should I edit in the ABS?

 

[craigc]

Approach detection control function and walk away lock does not work

Approach lighting works for me (North American Lariat). If you mean approach unlock, yeah, i don't think that works, but it does do the lighting.

 

[Sequoia]

Does not work here. Switched on all "Approach" things in the moduls. I mean the lightning.

 

[sloon]

In ABS you will probably have a number like 760-03-01 F27C 562F, so rewrite 5 to D as shown in the table.

 

[HyperM3]

I tried to get rid of the seatbelt message using the "as built" and changing all the values to zeros. However, when I write it some values change back to the previous values. Any thoughts?

Yes, as long as you save it with the zeros and write, it should have saved. Even if the values populate back after the writing.

 

[Sequoia]

I was successfully able to activate Trail Turn Assist.

1) go to APIM and activate Trail Turn Assist
2) also in APIM (or in IPMA, not sure right now but it is clear to find): activate "off-road trail turn assist indication
3) ABS as build: go to 760-03-01. The second box is 5627. Replace the 56 with D6.
After writing it will show: D6A7 (that's correct).

Now you have a working and indicating Trail Turn Assist.

 

[Border411]

Yes, as long as you save it with the zeros and write, it should have saved. Even if the values populate back after the writing.

See...I did all that and the box and the "ok" still show up, but the seat icons are gone. I'll have to try again I guess.

 

[DIYPSCM]

I just did this.... only had to change 720-13-01 to all zeros, no more OK warning.

Sponsored