Sponsored

What did you do to your Ranger Raptor Today?

DaStockRR

Well-Known Member
First Name
Jeremy
Joined
Mar 6, 2025
Threads
10
Messages
189
Reaction score
270
Location
Louisiana
Vehicle(s)
2021 Ford Explorer ST & 2025 Ford Ranger Raptor
I installed the Morimoto as well, exceptional quality, bright, aesthetically pleasing, and complements the styling of the pickup.

IMG_3688.jpeg


IMG_3696.jpeg


IMG_3690.jpeg


IMG_3707.jpeg


IMG_3698.jpeg


IMG_3702.jpeg
I need that third brake light! Can you share the link of where you purchased it from?
 

SolarWinds

Well-Known Member
Joined
Feb 14, 2025
Threads
1
Messages
128
Reaction score
136
Location
PNW
Vehicle(s)
Ranger Raptor, Volvo XC40 Recharge
Occupation
IT Director
Today I did an undercoating. I used about 2.5 cans of clear wool wax. You can find basic kits online that include a flexible tube and nozzle so you can really get the inside of the frame rails.

Totally overkill here in the PNW but it took under an hour and it’s not toxic or anything to handle. I just threw a couple sheets of cardboard under the truck and went to town. We’ll see how it holds up over the next year
 

Sponsored

DaStockRR

Well-Known Member
First Name
Jeremy
Joined
Mar 6, 2025
Threads
10
Messages
189
Reaction score
270
Location
Louisiana
Vehicle(s)
2021 Ford Explorer ST & 2025 Ford Ranger Raptor

SolarWinds

Well-Known Member
Joined
Feb 14, 2025
Threads
1
Messages
128
Reaction score
136
Location
PNW
Vehicle(s)
Ranger Raptor, Volvo XC40 Recharge
Occupation
IT Director
Thanks!

That installation looks brutal! ?
It’s honestly not too bad. It feels a little disconcerting pulling on the headliner but it all came together okay. I’d give yourself an hour just in case.
 

Sponsored

Deleted member 9086

Sticker time:

IMG_3182.jpeg


IMG_3183.jpeg
Excellent stickers indeed, I have them also.

However the vendor will spam your email, even after opting-out of his automatic subscribing. Use a disposable email address.??
 

miniR

Well-Known Member
Joined
Sep 2, 2024
Threads
2
Messages
77
Reaction score
82
Location
NC/AZ
Vehicle(s)
24 Ranger Raptor
It’s honestly not too bad. It feels a little disconcerting pulling on the headliner but it all came together okay. I’d give yourself an hour just in case.
Mine would have been a lot easier had I known the inside connection of my Raptor is different than the one in the instructions.
Long story short, as to my install, the OEM light was unplugged, the provided connection was utilized, then plug into the light, test, reassemble.

I pulled the headliner down (a pain IMO) per instructions, then found no connection like illustrated in the instructions, I reassembled the headliner, and did as I detailed above.
So….my recommendation would be to unplug the OEM light, and not pull the headliner down if the above works for you, as it did for me.
Sponsored

 
 







Top