Anyone get FORScan to work on a 2026 yet?

[CaptAngry]

I posted a note in the stickied FORScan spreadsheet thread but didn't get any response so figured I'd make this more noticeable:

Has anyone successfully gotten FORScan to work on a 2026 Ranger (particularly a Raptor) yet?

Sponsored

 

[AZ Ranger Raptor]

Not sure about 2026, but on 2025 raptors you need to put vehicle in ET (engineering test mode).
1) start engine, put in neutral, then put in manual shift mode.
2) turn off engine...it should stay in neutral and not autonmaticall chang to park)
tun on accessory mode...press accelerator 3 times within 10 seconds
3) "ET" should display in dash. Connect forscan....

 

[CaptAngry]

Interesting. I did not know that. I'll try it tonight

 

[mAtTyG04]

Not sure about 2026, but on 2025 raptors you need to put vehicle in ET (engineering test mode).
1) start engine, put in neutral, then put in manual shift mode.
2) turn off engine...it should stay in neutral and not autonmaticall chang to park)
tun on accessory mode...press accelerator 3 times within 10 seconds
3) "ET" should display in dash. Connect forscan....

WTH? I have a 2025 and use forscan often. Never done any of those things and it works fine

 

[superj]

you may have to email and get a beta version. i think i remember having to do that to get into my father-in-laws 2025 when he first got it

 

[CaptAngry]

I broke down and just bought the license. $20 for a year isn't as cheap as it used to be, but I understand the extenuating circumstances for the devs

Now to try it tomorrow

 

[CaptAngry]

No change... FORScan still doesn't recognize my RR. I emailed the dev team so we shall see....

 

[CaptAngry]

And the amazing Dev team came through! They sent me a custom test build and boom... I'm in!

 

[superj]

Nice!!

 

[JohannTrim]

Thanks to CaptAngry above, I was able to get this code and get into my '26 RR and start looking to do some changes. I had to pay the license fee and then sent me code, fully functional.

 

[freakshow999]

I too have a 2026 RR!
Hey everyone do you know how to register for the Forscan forum? It's asking for an "Invitation Code"
Additionally will the two month free extended license work for now or do you have to purchase it in order to get a special build for 2026?
TIA

 

[CaptAngry]

You need to pay for a year license to get the forum invite code and for the admins/devs to build you a custom version for your truck.

They will likely incorporate the 2026 into the mainline build, but no idea how long that'll be

 

[JohannTrim]

https://forum.forscan.org/ucp.php?mode=register&sid=6551480bc131cca392d61007f981a855

I had to purchase a license, then they shipped me the beta code for my build.

I WILL WARN YOU THOUGH - I made a few innocuous changes to my truck (seat belts, chimes, a few things) and when I powered it on the next time it essentially lost its mind. I had to go reset a lot of settings and basically re-setup my truck. So, use with caution.

 

[freakshow999]

Thanks to CaptAngry above, I was able to get this code and get into my '26 RR and start looking to do some changes. I had to pay the license fee and then sent me code, fully functional.

Do you have their contact info?

 

[JeffJeff]

I broke down and just bought the license. $20 for a year isn't as cheap as it used to be, but I understand the extenuating circumstances for the devs

Now to try it tomorrow

Hello. Im new to the forum. Just got a 26 ranger raptor . I’m trying to buy the one year license for FORScan as well . I can’t seem to get it going. It says I need an invitation code. Any help on getting that ?

Sponsored