1/4" gap around the whole tailgate of Ranger Raptor

[Johnny 5]

I was power washing my wife's ranger raptor the other day and noticed how the water and soap just went right out the back of the inside of the bed and I looked and there's a quarter inch gap around the whole tailgate. If you open the tailgate, you can see a bunch of holes along the bottom of the bed, where it looks like a seal should have been placed. Does anyone else have this issue? I'm sure the dealers don't even have an answer for this yet. I don't like this.......

 

[Cyrusblack]

When I run the truck through the car wash all four doors seem to have water in the door jams and sills. It doesn’t leak into the truck.

 

[jrRaptor]

There are also holes towards the cab at the bulkhead. The bed, even with a tonneau cover, is not impervious to water intrusion at all.

 

[Bonus Oz]

there is a dust seal kit available as an extra from ford .

 

[CACTUSGREYFX4]

It's not just the Raptor my Lariat is the same way.

 

[yoopercharged]

I don't think any pickup truck bed comes sealed from the factory. If you want it to be water resistant you'll have to pick up a seal kit.

 

[Top Fuel Friday]

Isn't that so water can escape out of the bed? I wouldn't want my bed to turn into a pool until it's redneck hottub time.

 

[LLCCPA]

My dealer told me this was an issue with F150's and Ford came out with a seal for the area. They haven't heard but are expecting the same for the Ranger at some point.

 

[Crapblaster]

• The Dust Defence Kit is engineered to help combat water and dust ingress via the tailgate.
• Features metal side plates and rubber extrusion for superior sealing.
• Suits pick-up variants without factory fit roller shutter and compatible with most Ford Licensed Accessory tonneau covers by EGR.
• Not compatible with Ford Licensed Accessory Soft Tonneau Covers for Load Rest (VP1WZ99501A42X/W) or for Long Leg Sports Bar (VP1WZ99501A42Y).
• This is a Ford Licensed Accessory by EGR backed by Ford Warranty.

 

[Crapblaster]

Dust Defence Installtion instructions:
https://20035908.fs1.hubspotusercon...MY22 Ford Ranger DDK kit - PICTORIAL ONLY.pdf

 

[Cyrusblack]

there is a dust seal kit available as an extra from ford .

I think he is talking about this -
https://accessories.ford.com/tailgate-bed-dust-seal-1

 

[Crapblaster]

I think he is talking about this -
https://accessories.ford.com/tailgate-bed-dust-seal-1

Yeah, that type works on the F150, the Ranger has a big gap there to fill.

 

[FossIsleBC]

• The Dust Defence Kit is engineered to help combat water and dust ingress via the tailgate.
• Features metal side plates and rubber extrusion for superior sealing.
• Suits pick-up variants without factory fit roller shutter and compatible with most Ford Licensed Accessory tonneau covers by EGR.
• Not compatible with Ford Licensed Accessory Soft Tonneau Covers for Load Rest (VP1WZ99501A42X/W) or for Long Leg Sports Bar (VP1WZ99501A42Y).
• This is a Ford Licensed Accessory by EGR backed by Ford Warranty.

I like the looks of this one, but appears to be an Australian product, and the one they list for Ranger says fits "2011-present". Not sure how the one product can fit the different generations of Ranger. Anyone have any actual experience with this product or ordered it for their 2024 MY?

https://www.egrdirect.com.au/products/egr-dust-defence-kit-ford-ranger-px

 

[Crapblaster]

I like the looks of this one, but appears to be an Australian product, and the one they list for Ranger says fits "2011-present". Not sure how the one product can fit the different generations of Ranger. Anyone have any actual experience with this product or ordered it for their 2024 MY?

https://www.egrdirect.com.au/products/egr-dust-defence-kit-ford-ranger-px

This SKU says 2022 onwards:

EGR Dust Defenders
Ford Ranger RA 2022-Onwards
SKU: 040183_4

 

[gstahl]

I was looking at this and was trying the seal kit that comes with RokBlok. There is such a large gap bedside that that kind of foam seal will not help you. It will seal the top 6” but the rest cannot sealed without something like the Ford kit. The problem with the ford kit is that it makes the bed opening narrower.

Thinking about other solutions, nothing comes to mind yet.

Sponsored