Built -> Shipped -> Final Prep

[Wayfaring Ranger]

More stuff is showing in the app

How many days have you officially been "in production" with the date included?

Sponsored

 

[jdlapointe]

Mine is also showing in the app now. Mine went "In production" 1/8, but it officially entered production 1/16 with a 1/15 schedule date.

 

[tbalt14]

More stuff is showing in the app

When I bought my GMC Canyon, I had the dealer enable onstar so I could track it during shipping. I met the truck at the dealer the night it was being dropped off. The truck driver let me sit in it and check it out before the dealer even saw it. Kind of neat watching it pulled off the truck.

 

[Wayfaring Ranger]

Mine is also showing in the app now. Mine went "In production" 1/8, but it officially entered production 1/16 with a 1/15 schedule date.

Similar here.

Week of 1/15 production announce
"In Production" stage 1/10
"In Production" w/ date was 1/18
Modules started showing early 1/19. So far only BCE, no PCM modules.

I think someone has mentioned previously that it usually takes ~12 hours from start to finish, so they seem to be taking it slow if that is a fact.

 

[Wags]

How many days have you officially been "in production" with the date included?

2 days, I was scheduled for the week of the 15th with a check mark last week. If you look at my signature you can see all my previous build dates that got bumped

 

[donnellb]

My Ranger goes into production 02/19/2024. Ordered 12/09/2023. I have my VIN#. I used the link above and get Module Buld Data (As-Is). Then down below module Information Found. PCM and BCE have nothing under them. I know what the PCM modules is. Had to replace one in my girls 2005 Ford Escape. I assume this page just shows when these items get powered up in your build?

 

[Wags]

More stuff is showing in the app

Also under vehicle it’s showing the. WiFi hotspot

 

[Wayfaring Ranger]

Was doing a bit of reading on the bronco forums. If the modules page lists a "tear tag" value at the top, it may mean you are either finished being built or very close to that.

Mine is showing up but the tracking page doesn't show it as "built".

 

[Wags]

Mine has a tear tag but still doesn’t show built on the tracker and nothing under the PCM Modules section whatever that is.

 

[jdlapointe]

Mine is the same as above. I assume Monday/Tuesday will have some updates.

PCM should stand for "power control module" So the brain(s) that control(s) the engine and transmission.

 

[Deepsea619]

Anyone made it to these statuses yet?

I've been in production since jan 10th but no movement since. I'm patiently watching the module page to see when my truck officially comes alive, hoping to achieve 'built' status by the end of this week.

If anyone is 'built', i'd be curious how long it takes to get from that to 'shipped'. This might give us some idea how long they are holding trucks back for a more comprehensive QA stage or shipping delays.

LOL, not even close. I haven’t even got my VIN yet.

 

[TVRangerSTX]

My Vehicle Order Tracking page says the same thing ... "Scheduled" and "In production" 01/08/2024...but no checkmark, since last updated 01/13
*I can get my As Built... hundreds of codes also, which mean nothing to me.
*I added it to my Ford Pass but it won't activate yet.
*And the dealer Daily Status Report has me down for 01/08 Schedule Date and 0129 DLR ETA, but the dealer said probably not til Feb sometime.
*I did just get an email and text from Ford, 1/18, attached saying it is delayed, with no dates. It's a waiting game.
*I am gettng the spray in bedliner, but I don't see that being a huge delay...LineX did my 5g in a few hours.

On a side note, remember when everyone was saying why get a small truck when for the same money you can get an F150? I love F150's but just too big for my garage. So I was at the dealer yesterday, because no one is around on Sundays to pest you, and looked at a Big Brother to my Ranger, a white F150 Supercrew, XLT, no bells and whistles, not even a spray in bedliner, which my Ranger will have, and it was $58k...wow...That's $15k over my Ranger sticker. That was sticker shock, I figured they would be closer...

 

[MackDaddy]

My Vehicle Order Tracking page says the same thing ... "Scheduled" and "In production" 01/08/2024...but no checkmark, since last updated 01/13
*I can get my As Built... hundreds of codes also, which mean nothing to me.
*I added it to my Ford Pass but it won't activate yet.
*And the dealer Daily Status Report has me down for 01/08 Schedule Date and 0129 DLR ETA, but the dealer said probably not til Feb sometime.
*I did just get an email and text from Ford, 1/18, attached saying it is delayed, with no dates. It's a waiting game.
*I am gettng the spray in bedliner, but I don't see that being a huge delay...LineX did my 5g in a few hours.

On a side note, remember when everyone was saying why get a small truck when for the same money you can get an F150? I love F150's but just too big for my garage. So I was at the dealer yesterday, because no one is around on Sundays to pest you, and looked at a Big Brother to my Ranger, a white F150 Supercrew, XLT, no bells and whistles, not even a spray in bedliner, which my Ranger will have, and it was $58k...wow...That's $15k over my Ranger sticker. That was sticker shock, I figured they would be closer...

What drivetrain were you looking at? I've seen brand new XL trims with awd, v8, crew cab, short bed, go for 40k. I'm looking at nationwide prices though. Look at this XLT v8 for 45k https://www.cars.com/vehicledetail/fa6d1e10-f5b6-4033-abee-9df05c640d18/

 

[TVRangerSTX]

What drivetrain were you looking at? I've seen brand new XL trims with awd, v8, crew cab, short bed, go for 40k. I'm looking at nationwide prices though. Look at this XLT v8 for 45k https://www.cars.com/vehicledetail/fa6d1e10-f5b6-4033-abee-9df05c640d18/

I'll have to go back sometime and look. It was a 4WD, I think the 3.5 Ecoboost with 10 spd automatic. As far as options go it seemed pretty basic, like I said, not even a bedliner. This was MSRP, no dealer markup because there were about 5 of them in a row. Maybe those factory floor mats are expensive

 

[DanTheMan]

https://www.motorcraftservice.com/AsBuilt/

What program can your read the file in that you have to download?

Sponsored