Negative... No ECO mode, not even before the FORScan alterations.
I know right, from Google search...
Please check to make sure ECO mode is enabled in the ABS screen and APIM screen. Under service options in Forscan is where you can select reboot modules.Ok, ran this procedure, since I'm interested in whether ECO mode would give any better fuel mileage driving around town. Was meticulous in all changes you posted and checked them twice. On my US 2024 Raptor, this is the only change that showed up to Modes that I can tell, plus no ECO mode.
I have one question maybe something I did wrong or am not aware of... when you say to "reboot ABS and APIM modules", I am not understanding what you mean? All I am aware of is Writing to the code once changed and saving log file after. Am I missing something I should have done, please elaborate on "rebooting modules"...?
Thanks... Steve W.
Yes, it does and I use it sometimes. There is a noticeable difference in power drop. I use it for long range driving. Trust me. It's there and it works. Your RR has the latest newest version of sync. That is why your screen looks different than mine. My model is a 2022. I never upgraded to that new version and I don't plan to. However, a friend of mine upgraded his and he lost that screen and got the screen like yours with just the three modes available. However, one of the three modes on his screen is eco mode. Check my reply to you and recheck using the screenshots I attached. Here is what the Raptor status looks like when it's in eco mode. You cannot access it using the dial! It is only available through the touch screen.
Yes, both have been enabled and double checked. Understand now that I have the latest version of SYNC 4 and that is likely the reason behind the center info-screen not allowing the modes to present themselves correctly... go figure! One more thing I will try... looks like there is limited room for mode icons to appear (horizontally), I wonder if I disabled Tow/Haul that this space might get populated by another available mode. Prolly worth a try anyway, since I love tinkering in FORScan. It's like repairing someone's PC that got infected, I always say at the end "I beat you, you POS". I see FORScan as a backdoor, allowing us to hack the system Ford is trying to prevent most everyone from changing, to meet their needs and/or get rid of annoyances at the same time.Please check to make sure ECO mode is enabled in the ABS screen and APIM screen. Under service options in Forscan is where you can select reboot modules.
Is this your current screen ? I picked my truck up from the dealership and the sync screen looked the same . Had to have a Ford tech on here send a fresh APIM as built file to fix since the dealership seems to be lacking master tech’s these days in my area and they are glorified lube techs messing with trucks that are more than their salaries.Ok, ran this procedure, since I'm interested in whether ECO mode would give any better fuel mileage driving around town. Was meticulous in all changes you posted and checked them twice. On my US 2024 Raptor, this is the only change that showed up to Modes that I can tell, plus no ECO mode.
I have one question maybe something I did wrong or am not aware of... when you say to "reboot ABS and APIM modules", I am not understanding what you mean? All I am aware of is Writing to the code once changed and saving log file after. Am I missing something I should have done, please elaborate on "rebooting modules"...?
Thanks... Steve W.
Yes, that's my current screen. I think it may have always looked like that, not sure I was in there previously (when brand new) to remember if so. Also haven't gotten back to it yet, to try disabling Tow/Haul, to see if another (Eco) icon would take its place (limited horizontal icon space as shown). Disappointed I can't get Eco to show up, for just around town driving (gas mileage increase).
