FORScan NA Ranger 6th Gen (2024+) Crowdsourced Spreadsheet

[EzequielArgentina]

Hello, I would like to share some information, you may have it already, but playing with my ranger and forscan and made a mistake and screwed up my 360 camera settings.
I did not backed up original settings so I was unable to "restore".. however,, surfing the web, I found this offical ford site where all the original codes can be downloaded based on your VIN
the site is: https://www.motorcraftservice.com/AsBuilt/Details
I hope this may help someone.

Sponsored

 

[EzequielArgentina]

anyone knows or have tried how to change the time until the truck start alerting that you need to handle the wheel? I mean. (sorry my english).. if you set auto cruise control and keep line assistance, the truck keeps you in the line and a steady speed, but if you are not holding the wheel, after around 30 sec it starts alarming (showing a message in the screen), then after 15ish seconds an alarm starts sounding. I was wondering if those timeouts can be increased someway?

 

[superj]

anyone knows or have tried how to change the time until the truck start alerting that you need to handle the wheel? I mean. (sorry my english).. if you set auto cruise control and keep line assistance, the truck keeps you in the line and a steady speed, but if you are not holding the wheel, after around 30 sec it starts alarming (showing a message in the screen), then after 15ish seconds an alarm starts sounding. I was wondering if those timeouts can be increased someway?

I don't think anyone has though i would like to get rid of that timer completely

 

[EzequielArgentina]

I don't think anyone has though i would like to get rid of that timer completely

chat gpt gave some directions, I am not used to modify the asbuilt settings, so I am waiting until someone do it

 

[EzequielArgentina]

@superj i found this:
Increase Timeout for Hands-Off Steering Alert (Driver Monitoring System / Lane Centering)
Goal:

Extend the time before the car sounds an alarm when it detects you’re not holding the wheel.

Module: IPMA (Image Processing Module A) or PSCM (Power Steering Control Module)

• Unfortunately, Ford does not provide direct control over the timeout period via FORScan. However, some users have found that disabling driver monitoring for Lane Centering reduces false alerts.

Workaround (Experimental):

• IPMA 706-01-01
  • Default: xxxx xxxx 0xxx
  • Try modifying the last digit to "1" or "3", depending on region.
  • This is risky and undocumented — do at your own risk.

You can also try:

• BCM: disable “Driver Alert” systems (though this may affect other safety features).
• Or consider changing Lane Centering sensitivity in BCM or IPMA if available.

Let me know your IPMA values and I can help more precisely.


Disable Auto Start-Stop
Module: BCM (Body Control Module)

• As-Built Address: 726-48-02
  • Default: varies
  • Change to: xxxx x0xx xxxx
    • The second nibble (x0xx) disables auto start-stop (in many Ford models).

Alternative (Simpler):

If available in BCM plain text menu (not as-built), look for:

• Auto Start/Stop → Set to Disabled

Note: Some newer Raptor T9 models restore the setting on every reboot, so some people install hardware bypass modules instead.

 

[superj]

Me trying will have to wait till i am bored enough to get the laptop plugged in to the truck.

The humidity has the temps at 101 today so i dont want to sit in the truck sweating trying stuff, it might be a while for me.

Sponsored