FORScan NA Ranger 6th Gen (2024+) Crowdsourced Spreadsheet

[Sequoia]

This stuff is well known and I have it as well.
but please explain the exact way to cancel the seat belt prompt

Sponsored

 

[Sequoia]

No Answer to this?

 

[landiscarrier]

This stuff is well known and I have it as well.
but please explain the exact way to cancel the seat belt prompt

No Answer to this?

I’m not sure what you mean? All the steps and what to change are right there on the screen shot.

 

[Peter949]

Just curious if anyone have bypassed navigation in motion yet?

 

[Sequoia]

I’m not sure what you mean? All the steps and what to change are right there on the screen shot.

Honestly? I’m a big fan of precision.

The screenshot also highlights the Digital Engine Oil Gauge. On top of that, I really appreciate it when people are willing to answer questions about what they’ve done, because making changes to an as-built configuration is not something to take lightly.

Do the four (!) entries shown in the screenshot only remove the pop-up display? Because the screenshot also states that the chimes are removed. Thanks!

 

[landiscarrier]

Honestly? I’m a big fan of precision.

The screenshot also highlights the Digital Engine Oil Gauge. On top of that, I really appreciate it when people are willing to answer questions about what they’ve done, because making changes to an as-built configuration is not something to take lightly.

Do the four (!) entries shown in the screenshot only remove the pop-up display? Because the screenshot also states that the chimes are removed. Thanks!

All I did is follow the chart and watched the video. He shows how to do it around the 7:22 mark.

 

[Sequoia]

Thanks, but that’s unfortunately a bit unprofessional, because you can break a lot of things in the as-built settings. Maybe someone else has successfully done it. Please also specify whether only the prompt on the display disappears, or whether everything is disabled, including the chime/beeping sound.
Has anyone actually managed to activate “Trail Cruise” successfully? In other words, the off-road cruise control system instead of just Hill Descent Control?

I also remember someone mentioning that the Trailer Assist feature could be activated as well. Unfortunately, I can’t find that post anymore.

 

[pablo94sc]

I turned all my seat belt stuff off minus the old school red warning light. Find my post, as it might tell you what I changed because I don't remember what I did.

 

[Sequoia]

I just wanna have the prompt gone. Not the rest. I will have a look. Thanks.

 

[pablo94sc]

I'll need to get the latest spreadsheet downloaded when I can get to my laptop, but does anyone else have reverse braking assist off and has already removed the warning message via Forscan? That really got on my nerves while I was getting the truck level at campsites. Like no sh!t it's off! The damn system tried to give me whiplash because there leaf on my driveway.

Similar annoyance with the "adaptive cruise is off" warning, or whatever it says, when you're using old-fashioned cruise control. Anyone get rid of that one?

And did anyone figure out how to disable having lame assist turn on with cruise control? I have a 4 button routine just to set the cruise (cruise, lane, ok, ok) and clear the messages.

Sorry for asking annoying questions, but I really dread booting up the old laptop.

 

[mystery323]

Hey everyone,

Has anyone figured out a way in FORScan to force the infotainment system to default to a specific screen (like Navigation or the FM tuner) on startup?

I strictly use Bluetooth for my music and voice calls—I don't use the truck's interface for phone GPS or scrolling through contacts. The annoying quirk on my '25 Raptor is that the system almost always defaults back to the "Connected Phone" screen when I fire it up.

I initially thought it was just booting to whatever screen was used last. I tested this by leaving it on the FM tuner, not touching anything, and shutting the truck off. Sure enough, on the next startup, it still defaulted right back to the phone screen!

Has anyone else found this annoying and successfully tracked down a FORScan value to either change the default boot screen or force it to actually remember the last used screen?

Appreciate any insight!

 

[superj]

No but I notice sometimes my truck starts on fma and sometimes in that phone screen you are talking about. I don't know why it does though and I haven't played in forscan to mess with it

 

[JWeigel]

You guys that have dug deep into what can be changed ......have you found that one can adjust what the factory includes in the "Modes" like the Towning Mode. I hate that when selecting the towing mode, it automatically puts the truck into 4Auto. I woudl rather this stay in 2WD. I also noted the color change to yellow is 99% complete. I noted a few elements like cruise set speed are still blue ....now yellow.

Thanks for any input.

jjw
ND

 

[lobsterantcitylights]

Is this specific to the 2024 model year? The reason I ask is that I stumbled on a paper titled "2025 Ranger Raptor: The Pro-Owner Master Programming Guide" and it has a different set of codes to change:

Matrix LED (Glare-Free) Activation:
APIM: 7D0-09-01: x1xx-xxxx-xxxx (Adds Menu toggle)
HCM: 734-01-01: xxxx-xxxx-x3xx (Enables Hardware)
HCM: 734-01-02: Bxxx-x2xx-xxxx (Global Strategy)
IPMA: 706-01-01: xxxx-xxx9-xxxx (Camera tracking)
SCCM: 724-04-01: xxx4-xxxx-xxxx (Stalk Handshake)

For the life of me I cannot find this document again and don't remember if it was linked off YouTube, Facebook, here or somewhere else, but now I'm not sure if I should try the settings @moproblems has listed or what this guide has listed. I've read through this thread and it seems like all the references from people who have tried the @moproblems version are in a 2024, but I have a 2025, so I'm wondering if I should try this other method.

thoughts?

I'm also having issues on a 25 RR. Getting a HCM code HCM 2101 and a message on the dash about something like "advance front light functions not active". I tried both codes and couldn't get it working.

 

[landiscarrier]

I'm also having issues on a 25 RR. Getting a HCM code HCM 2101 and a message on the dash about something like "advance front light functions not active". I tried both codes and couldn't get it working.

I ended up using the formula I found on a YouTube video for the F150. I was getting the same error codes you’re seeing. I’ll see if I can find it. I will say the glare free headlights is super cool!!

Sponsored