FORScan NA Ranger 6th Gen (2024+) Crowdsourced Spreadsheet

[joordan]

I cant find the TSR can you guide me ?

That I haven’t seen in forescan. It’s coded somewhere else. Do not know how to activate, I have it built in my trim

Sponsored

 

[rugedraw]

I cant find the TSR can you guide me ?

TSR would need to be enabled here in the APIM (possibly other locations in the APIM in your region:

Enabled here in the IPC (possibly other locations in the IPC, too):

Enabled here in the IPMA (again, may require other TSR related bits to be flipped for it to work):

Your best option would be to find a Ranger that has it working, pull the ab file from it on the motorcraft site with the VIN, and do a control F on the Ranger spreadsheet searching for TSR in the APIM, IPC and IPMA tabs to see what other bits related to TSR are enabled. However, these three above are the core bits to flip to get TSR to work.

If your Ranger came from a US market, then you would need to change the country code in the IPC and APIM to display UAE road signage. Country code is stored here in the APIM:

And here in the IPC:

You'd need to change 5553 (or whatever is there) to 4145 for the UAE:

.

Good luck.

 

[tdroesch]

Hey All,

Wanted to share my experience thus far with trail turn assist on a 2025 Ranger Raptor.

After following the Forscan instructions to activate this feature, the icon/button showed up on the off-road screen and an on/off slide button was added to the controls page. Unfortunately, when I tried to engage the feature off-road, it did not work. I tried in both 4H & 4L, with the steering wheel full locked, and at speeds under 5 MPH. The controls page slider responds briefly when tapped and appears to slide to "on", but then immediately returns to "off" - and the icon/button on the off-road screen will not respond to touch at all.

However, this may not be the end of the story as I noticed a few new Forscan DTC codes. I made a number of changes using Forscan to my truck that day, but my thought is that these DTC codes may correspond to the issue and provide a clue as to why the trail turn assist function does not work. Here are the codes:

ABS U3001 - Control Module Improper Shutdown Performance
* Additional fault symptom ( :68)
* Status (-68)

PSCM U0415 - Invalid Data Received From Anti-Lock Brake System (ABS) Control Module
* Status (-28)

I also have a third DTC code from the PSCM (Power steering control module), which may or may not be related:

PSCM U023A - Lost Communication With Image Processing Module 'A'
* Status (-28)

None of these have created a malfunction indicator lamp (warning light in dash), but the trail turn control does not work and I am considering just reversing the process on Forscan to see if these DTC codes go away.

If anyone with more skill and/or brains than me can lend some insight as to what my next steps should be, or if anyone else can share their experience with the trail turn assist feature, I would certainly appreciate it.

 

[Hande]

Spreadsheet instructions do not work in EU RR, I tried many times but could not get numerical displays 🥲

 

[rugedraw]

ABS U3001 - Control Module Improper Shutdown Performance
* Additional fault symptom ( :68)
* Status (-68)

PSCM U0415 - Invalid Data Received From Anti-Lock Brake System (ABS) Control Module
* Status (-28)

I also have a third DTC code from the PSCM (Power steering control module), which may or may not be related:

PSCM U023A - Lost Communication With Image Processing Module 'A'
* Status (-28)

None of these have created a malfunction indicator lamp (warning light in dash), but the trail turn control does not work and I am considering just reversing the process on Forscan to see if these DTC codes go away.

If anyone with more skill and/or brains than me can lend some insight as to what my next steps should be, or if anyone else can share their experience with the trail turn assist feature, I would certainly appreciate it.

Not sure why it isn't working for you, but these codes are stored codes and not active faults.

Sponsored