FORScan NA Ranger 6th Gen (2024+) Crowdsourced Spreadsheet

[Connman1]

These are the prompts I followed.

Can you tell me were you found these steps?

Sponsored

 

[midnight270]

@Patriot_USMC Try following these steps exactly. Don't listen to Google AI or where ever you got those steps.

Do these in this order. IPMA, SCCM, IPC, HCM, APIM. The settings below are for matrix lighting.

IPMA

SCCM

IPC

HCM

APIM

 

[midnight270]

After I changed the modules I needed to cycle the ignition on and off a few times for it to work. You'll know it worked when you go into the Lighting settings for the truck and see "Glare-Free Lighting"

 

[Patriot_USMC]

@Patriot_USMC Try following these steps exactly. Don't listen to Google AI or where ever you got those steps.

Do these in this order. IPMA, SCCM, IPC, HCM, APIM. The settings below are for matrix lighting.

IPMA

SCCM

IPC

HCM

APIM

Awesome!! Thanks so much!

 

[midnight270]

Awesome!! Thanks so much!

Let me know how it goes. I am curious now haha.

 

[Albanogc]

Hi mate, I hope you are well.
So I'm stuck in the same spot as you with these gauges.
Turbo and Oil Pressure Activated in IPC, but they don't show any info.
Have you figured out how to make it work?

Mine is a 4x2 so I haven't enabled those modes, but, about Rock Crawl and Ruts, the biggest differences seem to be H and L.

https://media.ford.com/content/ford...selectable-driving-modes-enhance-on--and.html

Hi guys, good day to everyone.
Has anyone found how to make those gauges work?

 

[Mav R]

Tried enabling glare free high beams tonight on my 26 Raptor. Tried twice and each time I ended with 4 diagnostic codes, so I rolled back the changes.

DTCs were:

pscm - U023A:00-28 (lost communications with image processing
module A)
RCM - B00DF:4A-08 (passenger restraints disable switch - incorrect component installed)
HCM - U2101: 00-08 (control module configuration incompatible)
IPC - U0415:00-08 (invalid data received from abs control module)

Not sure what the issue is but it feels like something has to have changed?

Tried enabling glare free high beams tonight on my 26 Raptor. Tried twice and each time I ended with 4 diagnostic codes, so I rolled back the changes.

DTCs were:

pscm - U023A:00-28 (lost communications with image processing
module A)
RCM - B00DF:4A-08 (passenger restraints disable switch - incorrect component installed)
HCM - U2101: 00-08 (control module configuration incompatible)
IPC - U0415:00-08 (invalid data received from abs control module)

Not sure what the issue is but it feels like something has to have changed?

Have you been able to revert the changes and clear the DTC's. I have similar issues and can't clear the RCM code

 

[JJT]

Hi, has anyone configured the windows so they automatically close when locking the vehicle with the key fob?

Sponsored