Sponsored

High beam boost feature missing with Matrix Glare-Free enabled

CherubiniB

New Member
First Name
Blake
Joined
Oct 30, 2026
Threads
1
Messages
1
Reaction score
0
Location
OH
Vehicle(s)
2024 Ranger Raptor
Occupation
Freelance Marketing, Photography, and Design
FORScan help! I made the changes to activate Glare-Free high beams... No issues there. What am I missing in order to activate the ‘high beam boost’ feature? Wondering what the HCM configurations look like for people "if" they do have it to see if I am missing something?

From what I can tell, my upper projector never turns on. Lower one handles low beams and high beams. Is the upper projector housing the dormant LEDs Ford mentions for the high beam boost?

FWIW, I am in the US and struggling to find any info on this feature.
Sponsored

 

surfstar

Well-Known Member
Joined
Jun 27, 2026
Threads
1
Messages
158
Reaction score
251
Location
CA
Vehicle(s)
2025 Lariat 2.3 FX4

smokinjoe64

Well-Known Member
Joined
Feb 1, 2025
Threads
8
Messages
193
Reaction score
232
Location
SoCal
Vehicle(s)
Ranger Raptor, BMW M3, M5, Mazda MX-5 & more
High Beam Boost feature is an automatic extension of the factory Matrix LED headlight system. It does not have a separate button or driver-selectable boost setting.
When the system determines full high-beam is appropriate, it can activate the additional dormant LED elements that provide boost.

How to verify it's working:​
- Find a dark, unlit road with no other traffic​
- Confirm the automatic high-beam system is ready​
- Drive above 25 mph​
- Observe whether forward beam intensity and distance increase when system has unobstructed conditions​
- When another vehicle is detected, glare-free system should adapt the beam to avoid dazzling vehicle​

I haven't found documentation establishing a separate FORScan change is required for boost.
 

Yonder_MN

Well-Known Member
First Name
Joe
Joined
Dec 1, 2024
Threads
14
Messages
144
Reaction score
186
Location
Minnesota
Vehicle(s)
25 Ranger Lariat 2.7, 20 Subaru Forester
I programmed this yesterday as I knew I would be driving rural roads last night. I was very happy with the outcome. I did see the system turn off at lower speeds (blue indicator off) and then back on above 25mph.

I was waiting to get flashed by oncoming traffic, but that did not happen, so all good!

Thanks to all of the information on these threads to make that happen.

(Also upped the turn signal lane change to 5, and found that to be just long enough for my style of lane change)

- Joe
 

smokinjoe64

Well-Known Member
Joined
Feb 1, 2025
Threads
8
Messages
193
Reaction score
232
Location
SoCal
Vehicle(s)
Ranger Raptor, BMW M3, M5, Mazda MX-5 & more
I programmed this yesterday as I knew I would be driving rural roads last night. I was very happy with the outcome. I did see the system turn off at lower speeds (blue indicator off) and then back on above 25mph.

I was waiting to get flashed by oncoming traffic, but that did not happen, so all good!

Thanks to all of the information on these threads to make that happen.

(Also upped the turn signal lane change to 5, and found that to be just long enough for my style of lane change)

- Joe
Sounds right - - GFHB functioned as advertised.

IMO, one the best driver aid/features that's 'always on' whether in urban or dark/rural driving conditions. GFHB coupled with 'Bambi Mode' provides exceptional OE lighting capability.

Activated early `25 with zero opposing traffic HB 'flashing'.

Appears MY26 forward removed GFHB functionality, including w/ Forscan coding efforts.
Sponsored

 
 







Top