Ranger without the 120V/400W in-bed power package - anyone do a mod with the blank panel?

[alrashid2]

Hey guys. I ordered a 2026 Ranger XLT without the 120V/400W in-bed power package. I know it'll just come with a blank, black steel plate attached to that location in the bed with 4 screws.

Curious if anyone has done any mods with that? I think it could be useful for something but have to think on it... maybe a secret storage compartment on the other side? Or drill into the plate for additional attachment points or something?

Anyone done anything with it?

Sponsored

 

[stemplar]

If you care about power outlets it might be worth looking to see if your truck has the wires for the panel run to the back. If so the panel itself is pretty affordable; the part number is in another recent thread. I replaced my ‘25 panel that had the 110v outlet only for a panel from a ‘24 that had both 110v and 12v.

 

[alrashid2]

If you care about power outlets it might be worth looking to see if your truck has the wires for the panel run to the back. If so the panel itself is pretty affordable; the part number is in another recent thread. I replaced my ‘25 panel that had the 110v outlet only for a panel from a ‘24 that had both 110v and 12v.

That's cool! If the wiring is truly there and the panel is cheap, that wouldn't be a bad thing to look into... but not going to lie, I've never felt a need to have power back there and can't even think of a situation where I would want or need it.

I was thinking it could be better utilized for storage or something! I was even thinking of pulling the blank panel and attaching a cargo net or canvas pocket to it or something for additional storage

 

[Sauce]

In addition to power you could add an on board compressor air chuck. if you want some storage, look into marine glove boxes to see if theres something that would fit into those dimensions. There are all different sizes, but this is the type of thing I'm referring to:
https://www.boatoutfitters.com/small-boat-glove-box

 

[alrashid2]

In addition to power you could add an on board compressor air chuck. if you want some storage, look into marine glove boxes to see if theres something that would fit into those dimensions. There are all different sizes, but this is the type of thing I'm referring to:
https://www.boatoutfitters.com/small-boat-glove-box

Awesome idea! Ill have to dig in and see if anything could fit

 

[superj]

That panel is plastic, so you may have to make a metal one if you find something close to mounting and need the panel as filler or a mount point

 

[alrashid2]

That panel is plastic, so you may have to make a metal one if you find something close to mounting and need the panel as filler or a mount point

Ah that is good to know, didn't realize it was plastic - thanks for the heads up.

Maybe I'll find some sheet metal and like you said, use the plastic one as a template!

Sponsored