Sponsored

johndeerefarmer

Active Member
Joined
Aug 3, 2021
Threads
1
Messages
37
Reaction score
24
Location
Texas
Vehicle(s)
2017 F150 and 2020 F350 and 2022 Ford Escape
The 2.3L from the '80s was a completely different engine from the turbo engine in current use in multiple Fords, including the Ranger.

The 2021 F-150 PowerBoost uses the 3.5L EcoBoost V6 along with an electric motor in series with the torque converter. That's a bit of an apples to oranges comparison though since the 3.5 does use both port and direct injection.

I wouldn't be all that concerned about coking on the 2.3 in the Ranger. That generally is more of an issue under low-load conditions. With the amount of weight it has to carry around in the Ranger I doubt there will be all that many low-load episodes.

If you are that concerned you could also add an oil separator into the PCV system, if Ford hasn't already.
Ford added port injection on the 3.5 eco to avoid problems. Until they add it on the other engines you may have trouble. I run Techron in my 2.0 ecoboost
Sponsored

 

blksn8k

Well-Known Member
Joined
Nov 20, 2017
Threads
0
Messages
108
Reaction score
95
Location
PA
Vehicle(s)
18 F-150 75 Bronco 70 Mach 1 68 Cougar 99 Cobra
Ford added port injection on the 3.5 eco to avoid problems. Until they add it on the other engines you may have trouble. I run Techron in my 2.0 ecoboost
That's a bit of an assumption. Although there may be some validity to that Ford will tell you that port injection was added to the EcoBoost engines to improve performance and efficiency.
BTW, ALL F-150 gas engines have had both port and direct injection since 2018. That includes the standard 3.3L V6 and the 5.0L V8, neither of which is a turbo engine. The addition of direct injection on the 5.0L allowed the compression ratio to be bumped from 11:1 to 12:1 while still being able to run on 87 octane. That's no small accomplishment. DI is not all bad.
 
OP
OP
bill_AUS

bill_AUS

Well-Known Member
First Name
Billy
Joined
Apr 24, 2021
Threads
6
Messages
388
Reaction score
430
Location
Victoria, Australia
Vehicle(s)
2020.75 Ford Ranger Raptor, 2013 Ford Ranger XLT
Occupation
Senior Eng & Tech advisor
That's a bit of an assumption. Although there may be some validity to that Ford will tell you that port injection was added to the EcoBoost engines to improve performance and efficiency.
BTW, ALL F-150 gas engines have had both port and direct injection since 2018. That includes the standard 3.3L V6 and the 5.0L V8, neither of which is a turbo engine. The addition of direct injection on the 5.0L allowed the compression ratio to be bumped from 11:1 to 12:1 while still being able to run on 87 octane. That's no small accomplishment. DI is not all bad.
On this note, the new Mustang 2.3 has dual injection, and the Nano V6 family had it from day one (the 2.7 and 3.0). I haven't seen what version of the 2.3 is going in the ROW Ranger, Everest and Amarok but I presume the same as the N/A 5G Ranger.
 
  • Like
Reactions: Doc

AssolMarandy

Well-Known Member
First Name
Wins
Joined
Nov 15, 2021
Threads
0
Messages
86
Reaction score
49
Location
Fargo, FL
Vehicle(s)
Ford F-150
This article shows how Ford continues to build trucks for business, family, and outdoor use.
Sponsored

 
  • Like
Reactions: Doc
 







Top