Sponsored

quickstang1

Well-Known Member
First Name
Tim
Joined
Oct 9, 2024
Threads
0
Messages
78
Reaction score
54
Location
Cypress
Vehicle(s)
2024 Ranger Raptor
Occupation
machinist
Ok, just took the time to install. I started with the passenger side and just turned the wheels all the way to the right. It took me about 20 minutes to do that side. I realized that I took too many screws out thinking I needed more space.

When I got to the driver's side, I turned the wheels all the way to the left and only removed the plastic air duct(see picture). That was enough room to get to the three screws holding in the fog light. This side only took me about 5 minutes.

The only complaint I have is that there's no way to check leveling when installing. There's a hinge in the mount for the light but once you tighten it down and mount it, there's no way to adjust it unless you take everything apart again. I won't be able to check beam pattern until it's dark tonight. Fingers crossed I did it right the first time.

PXL_20250129_163615237.jpg
Thanks for the update.
Sponsored

 

GLW

Well-Known Member
First Name
Gary
Joined
May 26, 2024
Threads
26
Messages
475
Reaction score
533
Location
Missouri
Vehicle(s)
2024 Ranger Raptor
It is "just a fog light" but when my cell phone flash light is brighter then the fog lights on a 60K truck, that is a problem. They could of gave us something a little better.
Did you connect the back light to an aux switch? If so, how did that go?
 

HyperM3

Well-Known Member
First Name
Alex
Joined
Jan 11, 2024
Threads
39
Messages
626
Reaction score
570
Location
Lawrenceville, NJ
Vehicle(s)
2024 Ranger Raptor Velocity Blue
Did you connect the back light to an aux switch? If so, how did that go?
I did not. Was too lazy to connect anything else. I got the yellow fogs and coded them to be on all the time anyway.
 

Sponsored

Ag3ntC00p3r

Well-Known Member
Joined
Apr 24, 2024
Threads
5
Messages
378
Reaction score
464
Location
Wisconsin
Vehicle(s)
Ranger Raptor
Occupation
Product Manager
Not ready to raise pitchforks and torches yet but it is annoying when you see orders that self reported to be placed after your own be shipped and received already.

To be honest, still not too worried about it. I had a lot more free time in December and beginning of January to install them then I do now or in the near future.

I plan on connecting the backlights to my AUX 1 with my grille lights.
 

HyperM3

Well-Known Member
First Name
Alex
Joined
Jan 11, 2024
Threads
39
Messages
626
Reaction score
570
Location
Lawrenceville, NJ
Vehicle(s)
2024 Ranger Raptor Velocity Blue

Blue_Raptor

Well-Known Member
Joined
Jan 10, 2025
Threads
5
Messages
117
Reaction score
123
Location
Simi Valley, CA
Vehicle(s)
2024 Ranger Raptor
Occupation
Engineer
Yeah, I did a lot in forscan.
Interesting interesting. Ok thanks. I have zero Forscan experience but there are a few things I’d like to get from it. The fog lights stay on in hi beams is one and if possible to stop the excessive nanny not allowing you to search your usb music drive while moving. Anyway, thanks.
 

johnkyle808

Member
First Name
Johnny
Joined
Jan 23, 2025
Threads
2
Messages
14
Reaction score
1
Location
asia
Vehicle(s)
24 raptor
am i correct to assume that when you press the fog light button on the heal light dial under the steeering column, this is the stock way to turn these on/off. this is not wired to the aux 1-6 above correct?
 

Mlowery1

Active Member
Joined
May 4, 2024
Threads
5
Messages
38
Reaction score
19
Location
California
Vehicle(s)
Ranger Lariat
So i currently have a 2024 Lariat, went to install my diode dynamics. Pulled the OEM fog lights out, and the bracket provided by diode dynamic doesn’t seem to match up.. any advice on this? Am i doing something wrong here?
see pics attached

Ford Ranger Diode Dynamics SSC1 Yellow Fog Lights installed IMG_2671


Ford Ranger Diode Dynamics SSC1 Yellow Fog Lights installed IMG_2672
 

Sponsored

jbethune

Well-Known Member
First Name
John
Joined
Apr 9, 2024
Threads
34
Messages
151
Reaction score
173
Location
NC
Vehicle(s)
2024 2.7 Ranger XLT
So i currently have a 2024 Lariat, went to install my diode dynamics. Pulled the OEM fog lights out, and the bracket provided by diode dynamic doesn’t seem to match up.. any advice on this? Am i doing something wrong here?
see pics attached

IMG_2671.jpeg


IMG_2672.jpeg
They wont fit; return them
Their website is inaccurate as is their employee who commented in the FAQ section.
 

Mlowery1

Active Member
Joined
May 4, 2024
Threads
5
Messages
38
Reaction score
19
Location
California
Vehicle(s)
Ranger Lariat
They wont fit; return them
Their website is inaccurate as is their employee who commented in the FAQ section.
Thanks for validating my initial thought, we’ll see how this return process goes

let my experience be a cautionary tale for non raptor folks lol
 

jbethune

Well-Known Member
First Name
John
Joined
Apr 9, 2024
Threads
34
Messages
151
Reaction score
173
Location
NC
Vehicle(s)
2024 2.7 Ranger XLT
Thanks for validating my initial thought, we’ll see how this return process goes

let my experience be a cautionary tale for non raptor folks lol
i probably should have posted earlier; i've got the RMA label here and just need to package mine up...just remind them that their website says they fit if you get trouble...

Ford Ranger Diode Dynamics SSC1 Yellow Fog Lights installed Screenshot 2025-03-04 at 07.57.28
 
 







Top