Up-Fitter Switch Harness Schematic Diagrams / Auxiliary Switches Wiring Diagram

[Deleted member 9086]

I’ve done a fairly in-depth forum search for a schematic for the Up-fitter Switch Wiring Harness, and terminal attachment point locations. Can’t find anything.

Would some one be so kind as to direct me to where I can find the OEM schematic for the wiring harness attachment points? Much appreciated!??

Sponsored

 

[dguffin]

This is what I have for pictures..

 

[Deleted member 9086]

This is exactly what I need. Thank you very much, appreciated and I’m grateful for your assistance.????

 

[805 Ranger Raptor]

Go to your screen in your Raptor under owners manual search Aux switch the schematics are all there ?

 

[Hootbro]

Here is the wiring diagram.

 

[Deleted member 9086]

Here is the wiring diagram.

Thank you!???

Go to your screen in your Raptor under owners manual search Aux switch the schematics are all there ?

I eventually found it in the Owners manual, pages 529/530. Thank you!???

 

[johnkyle808]

Here is the wiring diagram.

Hello Sir, can you please tell me if in this dialgram there is access to the highbeams? i am trying to wire a light bar i installed into the HBs and i dont know where to do that.

 

[Hootbro]

Hello Sir, can you please tell me if in this dialgram there is access to the highbeams? i am trying to wire a light bar i installed into the HBs and i dont know where to do that.

Attached is diagram for the North American model headlamps. There is a Halogen, LED Base and LED High set of diagrams. I assume the Raptor will be LED High. I think PDF page 8 shows the High Beam discreets.

 

[johnkyle808]

Thankyou for the quick reply. Maybe i can tell you my issue and you can educate me on whats best. I have a 2024 ranger raptor ill call it the asian model. im currently in thailand. i bought an altIQ 32" light bar that they advetise as being able to link directly to the high beams via aux5/6
i wired the light to aux6. and of course it doesnt link to the Hbs.
so im working with them now to try and resolve the issue. I thought maybe while i wait for their reply, i can wire the light bar to the high beams some other way? any education would be very helpful.

 

[Hootbro]

Thankyou for the quick reply. Maybe i can tell you my issue and you can educate me on whats best. I have a 2024 ranger raptor ill call it the asian model. im currently in thailand. i bought an altIQ 32" light bar that they advetise as being able to link directly to the high beams via aux5/6
i wired the light to aux6. and of course it doesnt link to the Hbs.
so im working with them now to try and resolve the issue. I thought maybe while i wait for their reply, i can wire the light bar to the high beams some other way? any education would be very helpful.

Sorry, there is only so much electrical I like to do over the internet before I want to be hands on with it in front of me. This is one of those situations.

 

[ShadowDragon24]

According to the ford pro body builders guide. theres 3 blunt cut wires under the bcm. on my xlt all 3 work, on an aussie one, apparently one of them dont. I think it was the high, the wire was there. but no power.

it also should be there on the raptor. They are used for triggering relays. one high beam trigger, one marker light(pos light aka position) and one run/start(ignition) I use the ign to turn on/off my dswitch and my arb second battery charger automatically, the marker wire puts my dswitch into night mode, and turns on my grill lights, and the highbeam is hooked to one the dswitch programable trigger inputs, and right now is set to turn on my lightbar with highbeams.

 

[Sal]

That looks like the internal harness, I'm trying to find the Aux wires, can you highlight where they are ?

Sponsored